571325
9
Zoom out
Zoom in
Previous page
1/21
Next page
Instruction for use Callisto Mini
9
© ETNA Coffee Technologies b.v.
COFFEE TECHNOLOGIES
5 PREPARING THE MACHINE FOR USE
Certain operations have to be carried out before the Callisto Mini is
ready for use. Although these installation operations should be carried
out by qualified personnel, they are listed step by step below.
The machine must first be set up in a suitable location (see paragraph
5.1) and the packaging removed (see paragraph 5.2). Next, the water
container must be filled and the machine connected to the mains
supply (see paragraph 5.3). Now, the ingredient bag must be placed in
the machine (see paragraph 5.4). After filling the supply hose for
ingredient (see paragraph 5.4.1) and filling the boiler (see paragraph
5.5), the machine is ready for use.
5.1 Installing machine
The location of the machine must meet a number of conditions.
The surface on which the machine stands must be flat and stable.
Also make sure that there is adequate clearance at the side to allow
the door to open. And free space at the rear for the mains cable
connection.
Site the machine in an area that does not freeze and is not too
humid.
Finally, it is advisable for hygiene reasons not to site the machine in
the vicinity of toilets.
If the machine is standing or has been standing in an area
where the ambient temperature is lower than 0 °C, there is
a risk of the water in the machine freezing.
The machine should be placed in an area where the
ambient temperature satisfies the requirements described
in chapter 10 for at least 8 hours before being switched
on.
5.2 Installing machine
The location of the machine must meet a number of conditions.
The surface on which the machine stands must be flat and stable.
Also make sure that there is adequate clearance at the side to allow
the door to open. And free space at the rear for the mains cable
connection.
Site the machine in an area that does not freeze and is not too
humid.
Finally, it is advisable for hygiene reasons not to site the machine in
the vicinity of toilets.
If the machine is standing or has been standing in an area
where the ambient temperature is lower than 0 °C, there is
a risk of the water in the machine freezing.
The machine should be placed in an area where the
ambient temperature satisfies the requirements described
in chapter 10 for at least 8 hours before being switched
on.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna Callisto Mini at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna Callisto Mini in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info