Manual Etna AKI586ZT (page 97 of 108) (English, German, Dutch, French)

692157

Zoom out

Zoom in

1/108

EN 19

OPERATION

Motor on/off key (15):

When touched, this key starts the motor if touched again, it stops the motor.

By operating the keys “+” and “-” the user can modify the suction speed (power). For the version

with 4-speed (serial) motor, only the 4th speed is timed.

Suction speed (power) decrease key (2):

When touched, the key “-” decreases the suction speed of the downdraft.

Suction speed (power) increase key (3):

When touched, the key “+” increases the suction speed of the downdraft.

Filter reset key (16):

When touched, this key will reset the warnings on anti-grease metal filter.

After 30 hours of hood operation, the key symbol (14) alternating with the key symbol (16), will

flash indicating the need to clean the anti-grease metal filters.

This alarm prevents the operation of the suction system until it is reset, to allow the condensate

tray to empty (operation to be performed as needed, but however each time you reset the filters).

Filter reset key (Active only in filtration mode) (14):

After 120 hours of operation of the hood, the keysymbol (14), alternating with the symbol (2), will

flash indicating the need to clean/replace the activated carbon filters.

The carbon filters can be washed in the dishwasher once, and then they must be replaced.

NOTE: In extraction mode, the alarm of carbon filters is disabled.

Timer key (1):

When touching key (1), the timer will be enabled, regardless of the selected suction speed.

• Upon first touch, the time will be 5 minutes (shown by a flashing button on the key),

• The second touch corresponds to 10 minutes (double flashing time).

• The third touch corresponds to 20 minutes (triple flashing time).

• The timer key will flash throughout the entire operation.

Touching the key a fourth time will disable the timer function.

Intensive key (4):

When touching key (4), the motor switches directly to the intensive phase, the key activates and

deactivates the intensive speed (4th speed, timed for approx. 8 minutes).

The timing of speed is active only in extraction mode

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Etna AKI586ZT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna AKI586ZT

Etna AKI586ZT Installation Guide - English, German, Dutch, French - 124 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Etna AKI586ZT Manual

Product: