692157
88
Zoom out
Zoom in
Previous page
1/108
Next page
EN 10
Boost power management Due to the restricted power of the induction hob, the boost
function can only be set on one cooking zone simultaneously (for both left or right cooking
zones). Both cooking zones can be set to level 9. If one cooking zone is on the Boost level, the
other cooking zone can be set maximal to level 7/8.
The cooking zone, which is set to a lower power, will be flashing in the display.
Pan detection
If the induction hob does not detect a (ferrous) pan after the cooking level has been set, the pan
detection symbol flash in the display. Set a suitable pot or pan on the cooking zone. If, after 10
minutes no pot or pan is detected the cooking zone will switch off.
Cooking-timer/alarm
A cooking-timer can be set for each cooking zone.
The hob also has an alarm. Both the cooking-timer as well as the alarm can be set for a
maximum of 99 minutes.
The alarm works in the same way as the cooking-timer, but is not linked to a cooking zone.
If the alarm has been set, it will continue counting down after the cooking zone has been
switched off.
The alarm can only be switched off when the hob is switched on.
Select the desired function:
1. Cooking-timer — the timer is linked to a cooking zone. After the set time has elapsed, the
cooking zone will switch off automatically.
2. Alarm — the alarm only beeps after the set time has elapsed.
Indications in the display
Cooking
zone
display
Cooking zone status
Power level cooking zone; 1 = low level / 9 = high level
Cooking zone boost level active.
No (suitable) pan on cooking zone (pan detection symbol).
Fault code; See ‘Troubleshooting table’.
Residual heat indicator; The hob has a residual heat indicator for each cooking
zone to show those which are still hot. Although the hob is switched off, the
indicator ‘H’ will remain on for as long as the cooking zone is hot!
Avoid touching them when this indicator is lit. Danger! Risk of burns.
<->
USE
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna AKI586ZT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna AKI586ZT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna AKI586ZT

Etna AKI586ZT Installation Guide - English, German, Dutch, French - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info