772693
42
Zoom out
Zoom in
Previous page
1/60
Next page
EN 6
The time settings for the fan are as follows:
Speed 1 - 20 minutes (light L1 flashes)
Speed 2 - 15 minutes (light L2 flashes)
Speed 3 - 10 minutes (light L3 flashes)
Intensive speed - 5 minutes (light L4 flashes)
By pressing the on/off button while the timer is on, the fan switches off,
and by pressing either the fan settings or timer button the fan reverts to
the set speed.
Grease saturation indicator for grease filter
After 40 operating hours the L5 indicator switches on.
When the indicator lights up, the grease filter that has been
installed must be cleaned.
To reset the indicator, press and hold the on/off button for
3 seconds.
Grease saturation indicator for activated carbon filter
After 160 operating hours the L5 indicator will start flashing.
When the indicator lights up, the activated carbon filter that has
been installed must be replaced.
To reset the indicator, press and hold the on/off button for
3 seconds.
In the event that the grease saturation indicator refers to both filters:
The L5 indicator will switch on for 3 seconds and then flashes
3 times.
To reset, follow the instructions above twice. The first time the
grease filter indicator is reset, the second time the active carbon
filter is reset.
In default mode the active carbon filter indicator will not switch on.
If the extractor hood is used in recirculating mode, then the activated
carbon filter indicator must be switched on.
Switching on the activated carbon filter saturation indicator
1. Switch off the extractor hood and press and hold the on/off and
timer buttons simultaneously for 3 seconds.
The L1 and L2 indicators will start to flash for 5 seconds.
USE
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna AI772 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna AI772 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info