Manual Etna AFI8525ZT (page 33 of 88) (English, German, Dutch, French)

446459

Zoom out

Zoom in

1/88

3. Press the On/Off button. The dishwasher

must be in setting mode.

4. Press the programme selection/cancel

button until the light corresponding to the

required washing programme comes on

(see "Washing programmes" chart).

Close the dishwasher door, the pro-

gramme starts automatically.

Setting and starting the programme with

delay start

The start of the washing programme will

be delayed by 3 hours.

1. Select a washing programme.

2. Press the delay start button. The corre-

sponding indicator light comes on.

3. Close the dishwasher door. The count-

down starts automatically.

Opening the door will interrupt the

countdown. Once the door is closed the

countdown will continue from the point

at which it was interrupted.

4. Once the countdown has elapsed the

washing programme will start automati-

cally.

Cancel a delay start in progress

1. Open the dishwasher door.

2. Press the delay start button. The corre-

sponding indicator light goes off.

3. Close the dishwasher door. The washing

programme will start automatically.

Warning! Interrupt or cancel a

washing programme in progress

ONLY if it's absolutely necessary.

Attention! Hot steam may escape

when the door is opened. Open the

door carefully.

Interrupt a washing programme in

progress

Open the dishwasher door; the programme

will stop. Close the door; the programme will

start from the point at which it was interrup-

ted.

Cancel a washing programme in

progress

• Open the dishwasher door; press the pro-

gramme selection/cancel button for about

3 seconds, until the light of the running

programme goes off and the End indicator

light flashes. The washing programme has

been cancelled and the appliance is now

in setting mode. .

• If a new washing programme is to be se-

lected, check that there is detergent in the

detergent dispenser.

End of the washing programme

• The dishwasher will automatically stop and

an audible signal informs you of the end of

the washing programme.

• Open the dishwasher door.

•The End of programme indicator light is

on.

• The indicator light of the programme just

ended remains on.

1. Switch off the dishwasher by pressing the

On/Off button.

2. Leave the dishwasher door ajar and wait

a few minutes before removing the

dishes; in this way they will be cooler and

the drying will be improved.

Unloading the dishwasher

• Hot dishes are sensitive to knocks. The

dishes should therefore be allowed to cool

down before removing from the appliance.

•Empty the lower basket first and then the

upper one; this will avoid water dripping

from the upper basket onto the dishes in

the lower one.

• Water may appear on the sides and the

door of the dishwasher as the stainless

steel will eventually become cooler than

the dishes.

When the washing programme has

finished, it is recommended that the

dishwasher is unplugged and the

water tap turned off.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Etna AFI8525ZT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Etna AFI8525ZT Manual

Product: