Manual Etna AFI8525ZT (page 26 of 88) (English, German, Dutch, French)

446459

Zoom out

Zoom in

1/88

Audible signals

Audible signals have been introduced to help

indicate which operations the appliance is

performing:

– end of the washing programme,

– intervention of an alarm due to malfunction

of the appliance.

Factory setting: audible signals activated

It is possible to deactivate the audible

signals.

Deactivation/activation of the audible

signals

1. Press the On/Off button. The appliance

must be in setting mode.

2. Press and keep pressed the programme

selection/cancel button until programme

light A flashes and programme light B

comes on with a fixed light.

3. Press programme selection/cancel but-

ton again. The programme light A comes

on with a fixed light and programme light

B starts flashing. Wait until programme

light A goes off. The programme light B

goes on flashing and the End indicator

light is on with a fixed light. This indicates

that you have activated the function for

deactivating/activating the audible sig-

nals. The fixed light of the End indicator

light means that the audible signals are

activated.

4. To deactivate the audible signals, press

the programme selection/cancel button

again. The End indicator light goes off in-

dicating that the audible signals are de-

activated.

5. To memorize the operation, switch off the

appliance by pressing the On/Off button.

• To activate again the audible signals sim-

ply follow the above operations until the

End indicator light comes on.

First use

Before using your dishwasher for the first

time:

• Ensure that the electrical and water con-

nections comply with the installation in-

structions

• Remove all packaging from inside the ap-

pliance

• Set the water softener level

• Pour 1 litre of water into the salt container

and then fill with dishwasher salt

• Fill the rinse aid dispenser

If you want to use combi detergent

tablets such as: ''3 in 1'', ''4 in 1'', ''5

in 1'' etc... follow the instructions

given in "Use of detergent".

Set the water softener

The dishwasher is equipped with a water

softener designed to remove minerals and

salts from the water supply, which would

have a detrimental or adverse effect on the

operation of the appliance.

The higher the content of these minerals and

salts, the harder your water is. Water hard-

ness is measured in equivalent scales, Ger-

man degrees (dH°), French degrees (°TH)

and mmol/l (millimol per litre - international

unit for the hardness of water).

The softener should be adjusted according

to the hardness of the water in your area.

Your local Water Authority can advise you on

the hardness of the water in your area.

The water softener must be set in two

ways: manually, using the water hard-

ness dial and electronically.

Water hardness Adjusting the water hardness setting Use of

salt

°dH °TH mmol/l manually electronically

51 - 70 91 - 125 9,1 - 12,5 2 level 10 yes

43 - 50 76 - 90 7,6 - 9,0 2 level 9 yes

37 - 42 65 - 75 6,5 - 7,5 2 level 8 yes

29 - 36 51 - 64 5,1 - 6,4 2 level 7 yes

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Etna AFI8525ZT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Etna AFI8525ZT Manual

Product: