Manual Etna A566ZT (page 17 of 40) (English, German, Dutch, French)

652318

Zoom out

Zoom in

1/40

Special requirements

before first use

Before connecting the hob to the electric

mains, check that the voltage and fre-

quency of the mains matches what is

shown on the hob’s rating plate, which is

located lower down, and on the guarantee

or, where appropriate, the technical datas-

heet supplied, which should be kept toge-

ther with this manual.

The apparatus is not designed to

be used by people (including children)

with reduced physical, mental or sen-

sory abilities. It should also not be used

by people that do not have experience

handling the apparatus or who do not

have knowledge of the apparatus,

unless they are supervised by a person

who is in charge of their safety.

Children should not be allowed

to play with the apparatus.

This appliance is not designed to

work through an external timer (not

incorporated into the appliance itself)

or a separate remote control system.

Ceramic hobs with controls

instructions

Each of the glass ceramic hob’s heating

elements is connected to a power regula-

tor that controls the operating and stoppa-

ge time of each of them (more or less

heat). (See fig. 4)

Each power regulator control knob has

numbering from “0” to “12”.

At postion “0” the hob does not operate, at

position “1” there is not much operating

time but a great deal of stoppage time.

With the remaining control knob positions,

the operating time increases while the

stoppage time decreases, until at position

“12” where operation is continuous, only

cutting off when the warm hotplate’s ther-

mostat cuts in to turn off the power when

the maximum permitted temperature is

reached.

Before turning on one of the hob’s heating

elements, you should identify the corres-

ponding control. To this end, it is shown

beside each control which heating element

it corresponds to.

DOUBLE CIRCUIT INSTRUCTIONS

(view fig. 5)

The double circuit heating elements are

hotplates made up of two mutually inde-

pendent heating elements, and they are

controlled by a power regulator that allows

the smaller, inside ring to be turned on, or

both inside and outside at the same time.

To only have the inside ring turned on, turn

the control knob clockwise and set it to the

position you require. To turn on the whole

hotplate, set the control to position “12”

Indicator of the operation of

the hotplate

Position of the control button in

standby position

Power level indicator

Use and Maintenance

fig. 4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Etna A566ZT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Etna A566ZT Manual

Product: