Manual Etna A266 (page 38 of 38) (English, German, Dutch, French)

2716

Zoom out

Zoom in

1/38

Above a 90 cm ETNA oven or an oven of

another make without casing cooling.

Fit a heat-resistant (85 °C) plate to screen off

the hob. Ensure that the space between the

hob and the protective plate is ventilated. This

space must not be connected with the space

above the oven. The space between the

underside of the hob and the top of the

protective plate must be at least 25 mm.

Sealing tape

Stick the sealing tape on the underside of the

edge.

Don't stick the sealing tape around the corner;

rather cut four pieces to fit effectively in the

corners.

Turn the hob over and allow the appliance to

sink into the opening.

Only for A266

Secure the hob using the fasteners supplied.

In the case of worktops thinner than 40 mm a

filler block has to be used between the

fasteners and the worktop. The screws must

be screwed into the pressed holes.

Connecting up and checking hob

Make the electrical connection by inserting

the plug in the socket or set the switch of the

power supply cable (in the case of a fixed

connection) to 1.

Test to check the hob is operational.

INSTALLATION GUIDE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Etna A266 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna A266

Etna A266 User Manual - Dutch - 38 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Etna A266 Manual

Product: