99275

Etna A095VWRVS Manual

30
Zoom out
Zoom in
Previous page
1/34
Next page
GB 10
GB 11
MAINTENANCE
Stubborn stains on enamel (pan supports, burner caps)
Remove with a non-abrasive cream or a soft sponge. Never use •
scouring powder, scouring pads, sharp objects or aggressive
cleansing agents.
Stubborn stains on stainless steel (drip trays)
If spilled, acid fluids and sugary foodstuffs like red cabbage, •
beetroot, soy sauce, applesauce and rhubarb may cause the surface
to discolour. Stubborn stains on stainless steel are best removed
with a special cleaning agent. Always polish in the direction of the
steel structure to avoid shine spots. (This kind of damage is not
covered by the warranty!)
If the above methods do not remove the stains, clean the plate •
with ATAG Shine. Remember to treat the entire drip tray in order
to avoid discolouring. Also, as a follow-up treat the drip tray with
a polish or maintenance agent for stainless steel. Please note that
over the years the surface will slightly discolour.
Cleaning removable burner components
The removable burner components (including wok) are best •
cleaned with a mild cleaning product and a soft cloth. In the case
of obstinate stains you can soak the parts in hot suds.
Never use scouring powder, scouring pads, sharp objects or •
aggressive cleansing agents.
Brass wok burner parts
A few parts of the work burner are made from brass. It is normal •
for the colour of the brass to change as a result of the high
temperatures that occur when cooking with a wok.
ATAG Shine
Atag Nederland supplies a range of cleaning agents under the •
name ATAG Shine. These can be obtained at the website at
www.atagservice.nl, where you will also find various cleaning and
operating tips.
General
FAULTS
Faults table
Faults table
If the appliance does not work properly, this does not always mean
that it is defective. Try to deal with the problem yourself first by
checking the points mentioned below in the table or visit our website
www.hps.nl for more information.
FAULTS CAUSE SOLUTION
There is a smell of gas in the
vicinity of the appliance.
A burner is turned on but
not lit.
The coupling on a bottled
gas unit has come undone.
Close the tap and wait
for a few minutes before
relighting.
Tighten the coupling.
A burner does not ignite. Plug not in socket.
Fuse defective/fuse in meter
cabinet switched off.
Sparkplug dirty/damp.
Burner parts not correctly
installed.
Burner parts dirty/damp.
Main gas tap closed.
Fault in the gas network.
Control knob not kept
pressed in long enough or
far enough.
Push the plug into the socket.
Fit a new fuse or switch the
automatic fuse back on.
Clean and dry the sparkplug.
Assemble the burner parts
using the centring ridges.
Clean and dry the burner
parts, making sure that the
outflow holes are open.
Open the main gas tap.
Check with your gas supplier.
Keep the control knob
pressed in far enough
between full and low.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna A095VWRVS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna A095VWRVS in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info