Manual Etna a 3415 ft (page 14 of 36) (English, German, Dutch, French)

331172

Zoom out

Zoom in

1/36

control

Electronic programming clock

Setting the time on the clock

On connecting the oven, you will notice that

‘12:00’ appears in the display and that a light

begins to flash next to the

symbol. By pressing

the ‘+’ and ‘-’ buttons, the correct time can be set

on the clock, which is subsequently stored and the

flashing light goes out.

Manual use

After setting the correct time, the oven is ready for

use. Select a temperature and a cooking function.

To switch off the oven, set the selectors to the

position ‘0’.

Warning function

1 Press the MODE button until the signal next to

the symbol

begins to flash.

2 Choose the time when you want the alarm to

sound, pressing the “+” or “-“ button.

3 Subsequently, the light will remain on,

indicating that the alarm is programmed.

4 At the end of the programmed time, an alarm

will sound and the light will begin to flash.

5 Press any button to turn off the alarm. The light

goes out and the screen shows the current time

again.

Programming the cooking time

1 Press the MODE button until the indicator next

to the symbol

begins to flash.

2 Select the length of the cooking time by

pressing the ‘+’ or ‘-’ button.

3 Subsequently, the indicator that was flashing

will light, indicating that the oven will switch

itself off automatically.

4 The display will then show the current time.

5 Select a temperature and cooking function.

6 When the set time has elapsed, the oven

will switch off, an alarm will sound and the

indicator will begin to flash.

7 Press any button to switch off the alarm, the

oven switches on again.

8 Set the selectors in the position ‘0’ to switch

off the oven.

Programming the end of cooking time

1 Press the MODE button until the indicator next

to the symbol

begins to flash.

2 Select the time that the cooking has to end by

pressing the “+” or “-“ button.

3 Subsequently, the indicator that was flashing

is lit, indicating that the oven will switch itself

off automatically.

4 The display will now show the current time.

5 Select a temperature and cooking function.

6 When the programmed time is reached, the

oven will switch off, an alarm will sound and

the indicator will begin to flash.

7 Press any button to switch off the alarm and

the oven will switch on again.

8 Set the selectors in the position ‘0’ to switch

off the oven.

This function may be used even though you are

already cooking in your oven. To do so, follow the

instructions given except Nº 5.

1 3 4 2

control

Programming the duration and automatic stop

1 Press the MODE button until the indicator next

to the symbol

begins to flash.

2 Select the length of the cooking time by

pressing the “+” or “-“ button.

3 Subsequently, the indicator that was flashing

will remain lit.

4 Press the MODE button again until the

indicator above the symbol

begins to flash.

5 Select the time that the cooking has to end by

pressing the “+” or “-“ button.

6 Subsequently, the indicator that was flashing

will remain lit.

7 Select a function and cooking temperature.

8 The oven will remain switched off. The

indicators next to the

and symbols lit.

Your oven is programmed.

9 When the programmed time is reached, the

oven will switch itself on and will continue

cooking during the programmed time.

10 When the programmed finishing time is

reached, the oven will switch off, an alarm will

sound and the light next to the symbol

will

begin to flash.

11 Press any button to switch off the alarm and

the oven will switch on again.

12 Set the selectors to the position ‘0’ to switch

off the oven.

Caution

Pressing the MODE button, the display on the

screen will show any function programmed. It can

be changed by pressing the ‘+’ or ‘-’ button. By

selecting the desired function, the indicator next

to the corresponding signal will light.

In the event of a power cut, all the programming

of the electronic clock will be erased. If you

connect the oven again, you will notice that

‘12:00’ appears in the display. The correct time

has to be set.

Switching off the time of day

To switch off the time of day, press two buttons

at the same time and, after several seconds the

screen of your clock will go out. To switch on the

time of day, press any button and the current time

will appear again.

This function can only be used when the clock

shows the current time and there is no function

programmed (no function symbol is lit). Press any

button to switch on the time of day again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Etna a 3415 ft in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Etna a 3415 ft Manual

Product: