336509
71
Zoom out
Zoom in
Previous page
1/76
Next page
265676
The appliance may only be connected by an authorized skilled technician.
Electric system protection should comply with all relevant regulations.
The connection clips can be accessed when the connection clip covers are opened / removed.
Before connecting the appliance, make sure the voltage indicated on the rating plate is consistent
with the voltage in your home circuit.
The rating plate with basic information is attached on the lower side of the hob.
The electric circuit should also include an omnipolar switch that will separate the appliance from
the mains, if required, with at least 3 mm of distance between contacts. Suitable devices include
fuses, current protection switches, etc.
The connection should be selected according to the installation possibilities with regard to current
and fuses.
Given the protection from the risk of re, appliances of this type may be installed in a worktop
next to a piece of kitchen furniture that is taller than the appliance (when installed); however, in
this case, a kitchen furniture not higher than the cooking hob must be installed on the other side,
adjacent to the appliance.
The current conducting and isolated parts must be protected from any possibility of direct contact.
ATTENTION!
Before any manipulation with the appliance (other than its regular use), disconnect it from the
power mains. The appliance should be connected according to the relevant scheme (diagram),
subject to the network voltage. Connect the earth (PE) wire to the clip indicated with the earth
/ground symbol.
The mains cord must be fed through the fastening clip / strain release device which protects it
from being pulled out accidentally.
After connecting the appliance, turn on all cookers for approximately three minutes to check their
operation.
Important warnings
For screwing down the xing clip it is not allowed to use
screws longer than 6,5 mm.
Connect the cooking hob to the power mains (see instructions
for connecting a cooking hob on a power network).
71
Connecting the appliance to the power mains
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna a 268 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna a 268 in the language / languages: English, German, French as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna a 268

Etna a 268 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info