336509
62
Zoom out
Zoom in
Previous page
1/76
Next page
265676
Reheating function is activated by pressing the “–” (I) sensor
key until the power level is set to 1.
Select the cooking zone by pressing the relevant sensor key
(H). The decimal point (F1) next to the display for the selected
cooking zone will light up.
Press the “–” (I) sensor key to set the power level to “0”.
Quick power off: the power level can be instantly set to “0”
by pressing the “+” (G) sensor key and “–” (I) sensor key
simultaneously.
The cooking hob may be turned off at any time by pressing the
on/off sensor key (A).
All indicators go off, except for the remaining, or residual, heat
indicators which are lit on the displays for those cooking zones
that are still hot.
If the cooking zone is turned off before the end of the cooking
process, the residual heat is used, which saves some power.
By activating the child lock, the operation and use of the cooking
zones is prevented. This way, children will not be able to activate
the cooking hob.
Activating the child lock
Activate the child lock by holding the (B) sensor key for
approximately three seconds; the (B1) signal light will light up.
Child lock can be activated when the cooking zone is
operating.
Child lock prevents activation of any sensor key, except for the
main switch (A) and the child lock sensor key (B).
Deactivating the child lock
Child lock can be deactivated, or disengaged, by holding the
(B) sensor key for three seconds. A beep will sound when the
lock is disengaged and the signal light above the sensor key
will go off.
As soon as a hot coking zone is switched off, or when the entire
cooking hob is turned off, the following is displayed on the
display of each hot cooking zone:
Turning off the cooking
zones
Turning off the cooking
zones
Turning off the cooking
hob
Turning off the cooking
hob
Activating the child lockActivating the child lock
Residual heat indicatorsResidual heat indicators
62
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna a 268 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna a 268 in the language / languages: English, German, French as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna a 268

Etna a 268 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info