327728

Etna 1921 brca Manual

3
Zoom out
Zoom in
Previous page
1/22
Next page
PRESENTATIE
Dit produkt voldoet aan de vereisten van de EG richtlijnen:
- Gasapparaten 2009/142/EEG
- Laagspanning 2006/95/EEG
- Elektromagnetische compatibiliteit (2004/108/EEG)
- Materialen gebruikt in contact met levensmiddelen (89/109/EEG)
ADVIEZEN VOOR MILIEUBESCHERMING
Verpakking
Gooi de verpakking van uw apparaat niet weg met het vuilnis,
maar scheidt de verschillende materialen (b.v. karton, schuimplastic,
enz.) volgens de plaatselijke voorschriften voor het verwerken
van afval.
Dit apparaat mag alleen worden gebruikt voor doeleinden
waarvoor het uitdrukkelijk bestemd is, als "kooktoestel"
Gas soort mbar Inspuiter Branders Pos. Vermogen kW Verbruik
AARDGAS 1,21 Sterk A 3,00 333 l/h
G 25 25
0,94 Normaal B-C 1,75 194 l/h
0,72 Sudder D 1,00 111 l/h
1,42 Wok E 3,60 400 l/h
1,60 Oven 4,30 478 l/h
1,50 Grill 3,80 422 l/h
Mod.1921 - 1986
WERKBLAD
Gas soort mbar Inspuiter Branders Pos. Vermogen
kW
Verbruik
AARDGAS 1,21 Sterk A 3,00 333 l/h
G 25 25
0,94 Normaal B-C-F 1,75 194 l/h
0,72 Sudder D 1,00 111 l/h
1,42 Wok E 3,60 400 l/h
Mod. 1926 - 1982 - 1989 - 1991 - 1992 - 1993 .
MULTIFUNCTIE
OVEN WATT
BOVEN
1000
ELEMENT
ONDER
1700
ELEMENT
GRILL 1800 +
ELEMENT 1000
ELEMENT ROND
2500
VENTILATOR
Mod. 1926 - 1989 - 1991 - 1992 - 1993.
NATUURLIJKE CONVECTIE
OVEN
WATT
BOVEN
1000
ELEMENT
ONDER
1700
ELEMENT
GRILL 1800 +
ELEMENT 1000
Mod. 1982.
D
A
B
C
E
D
A
B
C
E
F
Het apparaat mag niet worden gebruikt door personen (inclusief
kinderen) met lichamelijke, sensorische of geestelijke beperkingen
of personen zonder ervaring of kennis, tenzij zij over het gebruik
van het apparaat zijn voorgelicht door personen die verantwoordelijk
zijn voor hun veiligheid.
Jonge kinderen moeten onder toezicht worden gehouden om ervoor
te zorgen dat ze niet spelen met het apparaa.
BUITENAFMETINGEN
E
600
C
B
A
60
D
Semi-automatic use with end time setting
Press the end time button. The time of day appears on the display.
Set the cooking end time with + button. The AUTO and cooking
time symbols light up continuously. The relay contacts switch on.
When the cooking end time corresponds to the time of day, the
relay and the cooking time symbol switch off. When the cooking
time is up, the AUTO symbol flashes, the sound signal rings and
both the relay and the cooking time button switch off.
Before cleaning the appliance
, disconnect the gas general
tap and unplug the appliance or disconnect power at the
main circuit breaker of the electrical system.
Do not clean the appliance surfaces when still hot.
ENAMELLED SURFACES
Clean with a damp sponge using soap and water.
Grease can be easily removed using hot water or a specific
cleansing agent for enamelled surfaces. Do not use abrasive
cleansers.
Do not leave any acid or alkaline substances (lemon juice, vinegar,
salt, etc.) on the enamel.
Clean the parts in stainless steel with specific cleansers for
stainless steel surfaces.
These detergents must be applied using a soft cloth.
GRIDS AND BURNERS
To clean the work-top burners, remove them by pulling upwards
and soak them for about 10 minutes in hot water with a little
detergent. After having cleaned and washed them, wipe them
carefully.
Make sure that no burner hole is clogged.
Clean the burners once a week or more frequently if necessary.
MAKE SURE YOU HAVE ASSEMBLED THE BURNERS IN A
RIGHT WAY.
CARE AND MAINTENANCE
Removal of oven door
In-depth cleaning of the oven becomes more convenient if the
door is removed following the instructions below:
1 open the oven door completely.
2 flip the hinge hooks "A" outwards (see fig. 14B).
3 shut the oven door slowly until it reaches hooks "A", making
sure these are locked into slots "B" of the oven door, as shown
in fig. 14C.
4 Using both hands, push the oven door lightly inwards, toenable
the door hinges "C" to come away from the slots "D" (see fig.
14D) and pull the door towards you until it is released from the
oven.
After cleaning it, reposition it correctly following the abovesteps
in the reverse order and flipping hooks "A" inwardsbefore you shut
the oven door (fig. 14E).
Semi-automatic use with cooking time setting
Press the cooking time button and set the desired time with + or
-. The AUTO and cooking time symbols light up continuously. The
relay switches on immediately. When the cooking end time
corresponds to the time of day, the relay and cooking time symbol
switch off, the sound signal rings and the AUTO symbol flashes.
mm
715 100 - 160 600 25 895
A
B
C
D
E
mm
mod.
1910
1986
1926
1921
1982
715 123 - 177 600 30 8951992
1993
When the set time is up, the sound signal rings and the bell symbol
switches off.
Sound signal
The sound signal starts at the end of a programme or of the
minutes counter function and it lasts for 15 minutes.
To stop it, push any one of the functions buttons.
Start programme and check
The programme starts 4 seconds after it has been set.
The programme can be checked at any time by pressing the
corresponding button.
Setting error
A setting error is made if the time of day on the clock falls within
the cooking start and end times.
To correct the setting error, change the cooking time or cooking
end time.
The relays switch off when a setting error is made.
Cancelling a setting
To cancel a setting, press the cooking time button and then press
the - button until 00 00 appears on the display.
A set programme will automatically cancel on completion.
Automatic use with cooking time and end time setting
Press the cooking time button and select the length of the cooking
time with + or - button. The AUTO and cooking time symbols light
up continuously. The relay switches on. By pressing the cooking
end time button the next cooking end time appears on the display.
Set the cooking end time with + button. The relay and the cooking
time symbol switch off.
The symbol lights up again when the time of day corresponds to
the cooking start time. When the cooking time is up, the AUTO
symbol flashes, the sound signal rings, the cooking time symbol
and the relay switch off.
Minutes counter
Press the minutes counter button and set the cooking time with
+ or - button.
The bell symbol lights up when the minutes counter is operating
OVEN
Clean the enamelled parts with a damp sponge using soap and
water. Grease can be easily removed using hot water or a specific
cleansing agent for enamelled surfaces.
Do not use abrasive cleansers.
NL
42 3
AA
A
B
A
C
D
A
Fig. 14C
Fig. 14B
Fig. 14D
Fig. 14E
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna 1921 brca at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna 1921 brca in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info