2827
8
Zoom out
Zoom in
Previous page
1/24
Next page
8
Technical data
GB
Installation
ELECTRIC HOTPLATES
ø 145 mm 1,2 kW - High-Light hotplate
ø 180 mm 1,8 kW - High-Light hotplate
Type “X” hobs
EQUIPMENT
Depending on the models, hobs may have:
- One or more halogen hotplates
For the LAYOUT OF THE HOTPLATES ON
THE HOB see figure 1 at the back of this
manual.
For the ELECTRIC WIRING DIAGRAM see
figure 2 at the back of this manual.
The electrical power is stated on the name-
plate underneath the hob.
A copy of the nameplate is glued to the cover
of this manual.
INSTALLATION
The appliance must be installed by qualified
staff working in accordance with the regula-
tions in force.
You are advised to read these instructions
for use carefully; they contain important in-
formation which ensures the safety of the
installation. Keep these instructions in a safe
place.
After removing the packaging, ensure that
the appliance is not damaged:
- in particular, the ceramic glass hob must
not be broken or cracked;
Keep all the parts of the packaging (plastic
bags, polystyrene etc.) out of reach of chil-
dren, since they are a source of potential
danger.
CONNECTING TO THE ELECTRICAL
MAINS
The connection to the mains electrical sup-
ply must be made by a professional electri-
cian, who must take care to observe the nec-
essary precautions.
Before making the connection, check that:
- the mains voltage is as indicated on the
nameplate;
- the electrical line to which the appliance is
connected is of rated power appropriate to
the maximum power absorption of the ap-
pliance, indicated on its nameplate;
- the earth connection is in good working or-
der.
If the socket is not easily accessible, the in-
stallation engineer must provide an
omnipolar switch with a contact breaking gap
of 3 mm or more.
- If the appliance is supplied without lead,
using type H05RR-F or H05V2V2-F cable
of suitable size (see diagrams in fig. 2).
- Calibre of the protection device: 30A.
To connect the hob to the electrical mains:
- remove the controls protection cover on the
underside of the hob by unscrewing the 3
screws (see fig. 8);
- connect the power supply lead to the ter-
minal board, following the diagrams of fig-
334914 Piastra PVC Etna 28-11-2001, 9:428
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna 1358 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna 1358 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info