816063
14
Zoom out
Zoom in
Previous page
1/20
Next page
Page | 14
CAUTION Risk of fire!
When installing the appliance, please ensure that there are no easily
flammable materials (decoration, etc.) at a distance of at least 0.5 m.
The device can be placed directly on the ground or installed in any possible position in the trussing
without changing its functional properties.
The projectorbase can be installed in two different ways.
Always secure the projector with an appropriate safety cable when installing the head (assembly
height> 100 cm).
Only safety ropes and quick coupling joints according to DIN 56927, Shackle according to DIN EN
1677-1 and BGV C1 Kettbiner may be used. The safety ropes, quick couplings, shackles and warp ties
must be adequately dimensioned and applied correctly on the basis of the most recent occupational
safety regulations (eg BGV C1, BGI 810-3).
Please note: For overhead mounting in public or commercial areas, a large number of regulations
must be observed which can only be reproduced here. The operator must independently seek and
comply with the applicable safety regulations!
The manufacturer is not liable for damages caused by improper installation and inadequate safety
precautions!
Hook the quick-release fastener into the provided eyelet eyelet on the bottom of the device. Route
the safety cable over the beam or a secure mounting point. Hook the end into the quick-release
fastener and tighten the locknut securely. The maximum drop distance must not exceed 20 cm. A
safety cable which has been subjected to a crash or is damaged is not allowed to be used as a safety
cable.
CAUTION Danger to life!
The device must be checked by an expert before commissioning!
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etec LED Quad Moving Head BEAM BAR RGBW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etec LED Quad Moving Head BEAM BAR RGBW in the language / languages: English as an attachment in your email.

The manual is 1.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info