820926
18
Zoom out
Zoom in
Previous page
1/40
Next page
GB
18 / 40
MA00437302
Commissioning
5.3.3 Switching on – automatic (fully automatic)
When the detector has been triggered by motion and the ambient light has
fallen below the preset light value.
The red and green LEDs are active as indicators for motion detection=
two short flashes when motion is detected (only in control mode) / one short
flash when movement is detected after manual override. Should there be a
change in the natural light value, the artificial light will be adjusted accordingly.
5.3.4 Switching on – via push button (semi-automatic Classic)
If the measured light value (ambient light) is below the setpoint value when
switching on using the push button, the light is switched on and remains
switched on until no more motion is detected or the ambient light exceeds the
setpoint value (control mode). The red and green LEDs are active as indicators
for motion detection=two short flashes when motion is detected (only in
control mode) / one short flash when movement is detected after manual
override. Should there be a change in the natural light value, the artificial light
will be adjusted accordingly.
If the light value is above the setpoint during continuous presence detection,
the light is switched off automatically. If the light value falls below the setpoint
again, the light must be switched on again using the push button.
If the light value is above the setpoint when switching on, the light is switched
on by pressing the button as a manual override and remains switched on until
no more motion is detected.
5.3.5 Switching on – via push button (semi-automatic Smart)
As with semi-automatic Classic, but the detector automatically regulates up
again without the need to press the button again in the event of continuous
presence detection if the detector has previously switched the light off.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Esylux PD-C Duo Dali at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Esylux PD-C Duo Dali in the language / languages: English as an attachment in your email.

The manual is 1.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Esylux PD-C Duo Dali

Esylux PD-C Duo Dali User Manual - German - 40 pages

Esylux PD-C Duo Dali User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info