820940
14
Zoom out
Zoom in
Previous page
1/17
Next page
HANDLEIDING
14 / 17
NL
MD 360/8 Basic MD 360i/24 Basic MD 360/24 Basic SMB
MD 360i/8 Basic MD 360/8 Basic SMB MD 360i/24 Basic SMB
MD 360/24 Basic MD 360i/8 Basic SMB
Werking Klantspecifieke instelling
Channel 1
Read-in
Light
Time
Reset
LEDs ON/OFF
Fully/semi-automatic
Bat ok LS MDi
Time
5 min
Bat ok LS MDi
Nalooptijd
Instelwaarden: Korte impuls, 1, 2, 5, 10, 15 min.
Korte impuls
Zodra binnen het detectiebereik een beweging wordt gedetecteerd, schakelt de melder
de verlichting gedurende ca. 5 sec. in en gedurende ca. 5 sec. uit. Deze functie kan
bijv. worden gebruikt voor de schakeling van trappenlichtautomaten.
LED-indicatie: De rode LED is gedurende ca. 5 sec. ingeschakeld en gedurende 5 sec.
uitgeschakeld.
Nalooptijd: 1, 2, 5, 10, 15 min.
De nalooptijd gaat in nadat de laatste beweging binnen het detectiebereik is
gedetecteerd.
LED-indicatie: De rode LED knippert 3 keer in de cyclus.
Channel 1
Read-in
Light
Time
Reset
LEDs ON/OFF
Fully/semi-automatic
Bat ok LS MDi
Reset / fabrieksprogramma
De instellingen van de afstandsbediening worden gereset, de melder gebruikt de
waarden van de handmatige potentiometers.
LED-indicatie: De rode LED knippert 3 keer.
Channel 1
Read-in
Light
Time
Reset
LEDs ON/OFF
Fully/semi-automatic
Bat ok LS MDi
Melder-LED's AAN / UIT
Door op de toets te drukken, kunnen de LED's in de melder worden in- of
uitgeschakeld.
LED-indicatie:
LED's UIT: De rode LED is gedurende ca. 2 sec. uitgeschakeld.
LED's AAN: De rode LED knippert 3 keer.
Channel 1
Read-in
Light
Time
Reset
LEDs ON/OFF
Fully/semi-automatic
Bat ok LS MDi
Modus vol- / halfautomatisch
Door op de toets te drukken, kan de verlichting in vol- en halfautomatische modus
worden geregeld.
Volautomatisch: Afhankelijk van de ingestelde lux-waarde en of beweging wordt
gedetecteerd, wordt de verlichting ingeschakeld. Als geen beweging meer wordt
gedetecteerd, gaat de vooraf ingestelde nalooptijd in. Naar wens kan deze modus met
de externe toets “S” worden in- of uitgeschakeld.
LED-indicatie: De rode LED knippert 3 keer.
Halfautomatisch: De inschakeling van de verlichting vindt plaats via de externe toets
“S”. De verlichting blijft ingeschakeld zolang beweging wordt gedetecteerd en de
instelwaarde voor de helderheid hoger is dan de vooraf ingestelde lux-waarde.
LED-indicatie: De rode LED is gedurende ca. 2 sec. uitgeschakeld.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Esylux MD 360 Basic SMB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Esylux MD 360 Basic SMB in the language / languages: Dutch as an attachment in your email.

The manual is 1.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info