700256
7
Zoom out
Zoom in
Previous page
1/8
Next page
CAR AUDIO LOUDSPEAKERS
QXE42 · QXE52 · QXE62
QXE5.2C · QXE6.2C
QXE6.2W
2
EINBAUHINWEISE
Der erste Schritt bei der Installation der Lautsprecher sollte die sorgfältige Planung sein. Folgen Sie einfach
diesen Vorschlägen um das bestmögliche Resultat zu erreichen.
1. Wählen Sie eine Position für die einzelnen Komponenten, bei der das Signal am besten ohne Hinder-
nisse im Fahrgastraum verteilt wird. Beachten Sie dabei auch die Position der Sitze, Nackenstützen und
anderer Aufbauten im Innenraum.
2. Montieren Sie die Lautsprecher rechts und links in der selben Anordnung, d.h. sie sollten auf der glei-
chen Höhe und direkt gegenüber zueinander eingebaut werden. Vermeiden Sie wenn möglich, dass ein
Lautsprecher höher, tiefer, weiter weg oder näher wie der gegenüberliegende Lautsprecher montiert
wird.
3. Achten Sie beim Einbau darauf, dass der Abstand zwischen dem Hochtöner und
dem Mitteltöner möglichst gering ist.
4. Überprüfen Sie vor dem Bohren von Montagelöchern immer, was sich hinter der gewählten Montageä-
che bendet. Bitte beschädigen Sie auf keinen Fall Fensterhebevorrichtungen, Kabelbäume, den Tank
oder andere Fahrzeugteile.
5. Sie erreichen das beste Klangresultat, wenn die Lautsprecher fachgerecht in einem Türpanel oder einer
Heckablage fest montiert werden. Lücken oder lose Stellen zwischen Lautsprecherkorb und Monta-
geoberäche sollten abgedämmt bzw. geschlossen werden.
6. Bitte behandeln Sie die Komponenten mit Sorgfalt während des Einbaus, andernfalls könnten diese
ernsthaft beschädigt werden.
7. Bitte achten Sie beim Anschließen der einzelnen Komponenten stets auf die korrekte Polarität (+ / –)
der Anschlüsse.
8. Schließen Sie die Lautsprecher niemals an den Masseanschluss oder an die Karosserie des Fahrzeugs
an.
DEUTSCH
3
DEUTSCH
ANSCHLUSS QXE5.2C, QXE6.2C
Tiefmitteltöner Tiefmitteltöner
Hochtöner
Kabel-
weiche TW
Kabel-
weiche WF
Kabel-
weiche TW
Kabel-
weiche WF
Hochtöner
+ L – + R
Lautsprecherausgänge
am Verstärker
L R
L R
WICHTIG:
Bitte achten Sie unbedingt auf die korrekte Polarität (+ oder –)
aller Anschlüsse und Verbindungen.
+ WF – + WF –
+ TW – + TW –
+ IN – + IN –
+ IN – + IN –
4
DEUTSCH
ANSCHLUSS QXE42, QXE52, QXE62, QXE6.2W
Lautsprecher Lautsprecher
+ L – + R
Lautsprecherausgänge
am Verstärker
L R
WICHTIG:
Bitte achten Sie unbedingt auf die korrekte Polarität (+ oder –)
aller Anschlüsse und Verbindungen.
Optional: Ziehen Sie das Gehäuse der Hochtönerweiche (TW) ab.
Darunter bendet sich ein Steckkontakt, der in drei Positionen eingesteckt werden kann:
0 dB = keine Abschwächung bzw. – 3dB oder – 6dB Hochtonabschwächung
HOCHTONABSCHWÄCHUNG QXE5.2C, QXE6.2C
5
INSTALLATION NOTES
The rst step of installing a speaker system is thorough planning. Choose a suitable location for your speak-
er components carefully. Follow these suggestions to ensure proper imaging and maximum performance:
1. Choose a location that offers the least amount of obstruction between the components and your ears.
Pay also attention to the position of the seats, headrests and other constructional systems in the interior
space of the car.
2. Try to mount the speakers on the same arrangement. They should be installed at the same height and
directly across from each other. Do not mount one speaker higher, lower, further forward or further back-
ward from the opposite speaker.
3. The tweeter should always be installed as close as possible to the midbass speaker.
4. Always take a look behind the chosen mounting locations to ensure that there is proper clearance for the
rearside of the speakers and avoid obstructions such as window tracks, wire harnesses, gas tank etc.
5. Maximum performance is achieved when the speaker is securely mounted to a door panel or rear speak-
er deck. There should be no gaps between the speaker basket and the mounting surface
6. Please handle the components with care, otherwise they will get damaged.
7. Please pay attention to the correct polarity (+ or -) for all terminals and connections.
8. Never connect the speakers to the electrical ground or with the body of the vehicle.
ENGLISH
6
ENGLISH
INTERCONNECTION QXE5.2C, QXE6.2C
Midbass / Woofer Midbass / Woofer
Tweeter
Cross-
over TW
Cross-
over WF
Cross-
over TW
Cross-
over WF
Tweeter
+ L – + R
Speaker Outputs
at the Amplier
L R
L R
IMPORTANT:
Please pay attention to the correct polarity (+ or -)
for all terminals and connections.
+ WF – + WF –
+ TW – + TW –
+ IN – + IN –
+ IN – + IN –
7
ENGLISH
INTERCONNECTION QXE42, QXE52, QXE62, QXE6.2W
Speaker Speaker
+ L – + R
Speaker Outputs
at the Amplier
L R
IMPORTANT:
Please pay attention to the correct polarity (+ or -)
for all terminals and connections.
Optional: Pull off the housing of the tweeter crossover (TW).
Underneath is a jumper which can be plugged into three positions:
0 dB = no attenuation resp. – 3dB or – 6dB attenuation
TWEETER ATTENUATION QXE5.2C, QXE6.2C
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ESX QXE5.2C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ESX QXE5.2C in the language / languages: English, German as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info