700330
20
Zoom out
Zoom in
Previous page
1/28
Next page
20
AUTO TURN ON
Spingere l‘interruttore AUTO TURN ON (Fig. 1, 10) in posizione ON. Non appena si accende la sorgente,
l’amplicatore rileva un aumento di tensione (6 Volt), un cosiddetto “DC offset”, sull’ingresso ad alto livello
(HIGH LEVEL INPUT, Fig. 1, 8) e quindi si accende. Non appena si spegne la sorgente, anche l’amplicatore
si spegne automaticamente (REM, Fig. 1, 11).
Nota: La funzione di Auto Turn On funziona solitamente con il 90% delle sorgenti, in quanto dotate di uscite ad
Alta Potenza. Potrebbe non funzionare con sorgenti di vecchia generazione.
SENSIBILITÀ D’INGRESSO
ELEMENTI DI COMANDO
La sensibilità d’ingresso può essere adattata ad ogni autoradio o ad ogni sorgente. Ruotare il regolatore di vo-
lume audio della radio sulla posizione3/4del volume totale della radio, poi regolare il livello d’ingresso (Fig.1,5)
in modo da ottenere un volume in uscita dall‘ apparecchio indistorto. Cosi‘ da poter ottenere una prestazione
con un ottimo rapporto segnale rumore.
INGRESSO HI LEVEL
L´ingresso alto livello è indicato (Fig. 1, 7) per connettere l´ingresso dell´apparecchio con I cavi degli altopar-
lanti nel caso la vostra sorgente non sia equipaggiata di uscite RCA.
Attraverso cavi adeguati forniti dal vostro rivenditore car audio, prolungate le uscite della sorgente no a dove
volete posizionare il vostro apparecchio. A questo punto collegate I cavi corrispondenti ai cavi del connettore
HI LEVEL come indicato sotto.
Nota: non impiegare mai gli ingressi Hi Level ed RCA contemporaneamente. Il farlo potrebbe danneggiare
seriamente l´apparecchio. I cavi altoparlanti dell´ingresso High Level non devono avre nessun contatto con la
massa (GND).
grigio = destra - più
grigio/bianco = destra - meno
bianco/nero = sinistra - meno
bianco = sinistra - più
FILTRO PASSA BASSO REGOLABILE
Impostare le frequenze di crossover desiderata dal ltro passa basso utilizzando il regolatore (Fig.1, 3). In
questo modo solo le frequenze al di sotto della frequenza di crosssover scelta verranno amplicate ed il Sub-
woofer suonera‘ in modo piu‘ preciso ed efcente.
REGOLATORE DELL‘INCREMENTO DEI BASSI
INTERRUTTORE DI FASE
Utilizzando il regolatore BASS BOOST (Fig.1, 4) si può aumentare il livello dei bassi da 0 dB a 18 dB.
ATTENZIONE: Si prega di utilizzare l’aumento die bassi con cura.
L’interruttore di fase (Fig.1, 2) permette di impostare la fase tra e 180° in base al tempo di funzionamento
del segnale.
POWER INPUTS
REMOTE
LOW
PASS
BASS
BOOST
LEVEL
50Hz 150Hz MIN MAX0dB +18dB
PHASE
AUTO TURN ON
REM
GND
+12V
PROTECT
POWER
LINE IN
ON
HIGH LEVEL INPUT
LOW LEVEL INPUT
OFF
180°
FUSE
R
R
L
L
R
L
Q202A
+
+
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ESX Q202A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ESX Q202A in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 4,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info