700206
23
Zoom out
Zoom in
Previous page
1/32
Next page
23
Lea completamente las instrucciones de montaje antes de proceder a montar el amplicador y poner-
lo en funcionamiento.
DATOS TÉCNICOS Q-FOURv2 (12V) Q-FOURv2 (24V)
Potencia de salida RMS
Potencia de salida Max.
Impedancia de altavoces (estéreo)
Respuesta de frecuencia
Coeciente total de distorsión
Relación señal/ruido
Sensibilidad de entrada
Impedancia de entrada
Filtro de paso alto (CH1/2)
Filtro de paso alto / paso banda (CH3/4)
Filtro de paso bajo / paso banda (CH3/4)
Bass Boost (CH3/4)
Entradas de Audio
Entradas de Alto Nivel
Auto Encendido
Suministro eléctrico
Fusible
Dimensiones (A x A x P)
4 x 100 W @ 4 Ohmios
4 x 100 W @ 2 Ohmios
4 x 200 W @ 4 Ohmios
4 x 200 W @ 2 Ohmios
2 – 8 Ohm
10 – 20 000 Hz (-3 dB)
< 0,1 % (1 kHz)
> 90 dB
0,4 – 6 V
20 kOhmios (High Level 20 Ohmios)
20 – 4000 Hz @ 12 dB/Octava
10 – 500 Hz @ 12 dB/Octava
50 – 4000 Hz @ 12 dB/Octava
0 - 12 dB @ 45 Hz
4 x RCA (CH 1-4)
A través de un enchufe de cable cerrado
Solo a través de las entradas de alto nivel
+12 V (10 – 16 V), negativo a tierra
2 x 25 A (dentro del estuche)
150 x 50 x 220 mm
4 x 100 W @ 4 Ohmios
4 x 100 W @ 2 Ohmios
4 x 200 W @ 4 Ohmios
4 x 200 W @ 2 Ohmios
2 – 8 Ohm
10 – 20 000 Hz (-3 dB)
< 0,1 % (1 kHz)
> 90 dB
0,4 – 6 V
20 kOhmios (High Level 20 Ohmios)
20 – 4000 Hz @ 12 dB/Octava
10 – 500 Hz @ 12 dB/Octava
50 – 4000 Hz @ 12 dB/Octava
0 - 12 dB @ 45 Hz
4 x RCA (CH 1-4)
A través de un enchufe de cable cerrado
Solo a través de las entradas de alto nivel
+24 V (20 – 32 V), negativo a tierra
2 x 15 A (dentro del estuche)
150 x 50 x 220 mm
Reservados los derechos de realizar cambios técnicos.
CIRCUITO DE PROTECTÌON
ElPOWERLED(Fig.2,7)encendidoenverdesignicaqueelAmplicadorfuncionanormalmente.
ElPROTECTLED(Fig.2,7)encendidoenrojosignicaqueelAmplicadorestaencortocircuitoosobreca-
lentado. Puede ser debido a una impedancia demasiado baja de los altavoces. Si esto ocurre el circuito de
proteccióndelamplicadorlodesconectainmediatamente.Elamplicadorvuelveafuncionarporsisolouna
vez solventado el problema.
USO PREVISTO
Q-FOURv2 (12V) solo es adecuado para su uso en un vehículo con 12 voltios de tensión negativa a tierra.
Q-FOURv2 (24V) solo es adecuado para uso en un vehículo con voltaje de tierra negativo de 24 voltios.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ESX Q-FOURv2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ESX Q-FOURv2 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info