469838
6
Zoom out
Zoom in
Previous page
1/48
Next page
6 Esscom Twintalker 9200
Esscom Twintalker 9200
8 Getting started
8.1 Removing/Installing the Belt Clip
1. To remove the clip from the unit, push the belt
clip (B) towards the antenna, while pulling the
clip tab (A).
2. When re-installing the belt clip, a click indicates
the belt clip is locked into position.
8.2 Battery Installation
1. Remove the belt clip (§ 8.1).
2. Open the locking latch (C) and slide off the
battery cover.
3. Install the rechargeable battery pack following
the polarity as shown. Ensure that the metal
contacts on the side (D) are facing outwards
from the radio to connect on the battery door.
4. Re-install the Battery Cover and Belt Clip (§ 8.1).
9 Charging batteries
When battery packs are installed, the
desktop charger provides drop-in
charging conveniency
1. Put the desktop charger on a flat
surface.
2. Plug one end of the supplied
adapter into the electric socket
and the other end into the
connector on the backside of the
desktop charger.
3. Put the radio in the charger as
indicated.
4. The charging LED will turn on if
it’s properly inserted and
charging.
It will take about 8 to 10 hours to fully charge the batteries
Do not short-circuit & dispose of in fire. Remove the batteries if this
device is not going to be used for a long period.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Esscom TWINTALKER 9200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Esscom TWINTALKER 9200 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info