Manual Esscom POWERLAN 1220 (page 34 of 50) (English, Dutch, French)

523757

Zoom out

Zoom in

1/50

PL-1220

Reset/simple connect button

– Push down for two seconds to start the connection sequence.

– Push down for 12 seconds to restore the factory settings.

This completely changes the network password.

6 Connecting the PL-1220 plugs

By default, the PL-1220 plugs are not connected.

To connect them with each other, follow the procedure set out below.

1. Plug all the Powerlines into the power socket.

2. Push down the (reset/simple connect) key on the first Powerline plug

for two seconds.

The power-supply LED will flash slowly (0.5 seconds on/0.5 seconds off).

3. Within two minutes, push down the key on the second plug.

The connection sequence starts.

A random password will be exchanged between the Powerlines.

Once the connection is complete, restart both plugs and the

Powerline LEDs on both plugs will light up.

The Powerline plug switches to stand-by

mode (energy saving function) when it is

not connected to a device through an

Ethernet cable for 15 minutes.

The easiest way is to plug them in next to

each other in the same place. Once they

have been successfully connected, you can

put them in the desired location.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Esscom POWERLAN 1220 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 3,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Esscom POWERLAN 1220 Manual

Product: