469835
21
Zoom out
Zoom in
Previous page
1/28
Next page
Topcom Butler xxxx 21
PL-1200
DUTCH
21
ENGLISH
7 Adding an additional PL-1200
A Powerline network can be created with up to a maximum of eight
Powerlines. If you already have two Powerlines in operation, you can
add a maximum of six.
To add a Powerline, follow the procedure set out below.
1. Plug the extra Powerline into the power socket.
2. Push down for two seconds on the key on one of the Powerline plugs
that is already in operation.
The on/off light will flash slowly (0.5 seconds on/0.5 seconds off).
3. Within two minutes, push down the key on the extra Powerline plug
for two seconds.
The connection sequence starts.
Once the connection is complete, restart the plugs and the Powerline
LEDs on both plugs will light up.
Push down the reset/simple connect key for at least
12 seconds to restore the PL-1200 factory settings.
When the factory settings are restored, the PL-1200
plug will need to be reconnected!
Before adding the new Powerline, it is recommended that
the network passport for this plug be changed by pushing
down the "reset/simple connect" button for 12 seconds.
A Powerline that has already been used in another
network will still have the password for that network,
which means that the "reset/simple connect" button
mechanism will not operate.
HL_Esscom PL-1200 quick.book Page 21 Wednesday, October 6, 2010 4:22 PM
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Esscom PL-1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Esscom PL-1200 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info