469831
24
Zoom out
Zoom in
Previous page
1/104
Next page
24
Troubleshooting
Outgoing message menu
Press ‘8’ in the main menu. The unit shall announce ‘Outgoing message menu’ followed by the
outgoing message menu:
Setting the security code
10 Troubleshooting
2 Press ‘2’ to play the outgoing message.
3 Press ‘3’ to record ‘outgoing message 1’.
4 Press ‘4’ to record ‘outgoing message 2’.
5 Press ‘5’ to select ‘outgoing message 1’.
6 Press ‘6’ to select ‘outgoing message 2’.
8 Press ‘8’ to hear outgoing messages menu again.
1 Press ‘1’ to hear mean menu again.
5 The unit shall ask to press the ‘ ’ key to set a new VIP code. Press ‘ ’.
6 Use the numerical keypad to enter the new security code after the tone.
7 Press the ‘ ’ key to confirm.
1 8 The unit shall ask to press ‘1’ for main menu.
Symptom Possible cause Solution
No display Batteries uncharged Check the position of the
batteries
Recharge the batteries
Handset turned off Turn on the handset
No tone Telephone cord badly connected Check the telephone cord
connection
The line is occupied by another
handset
Wait until the other handset
hangs up
The icon flashes Handset out of range Bring the handset closer to the
base
The base has no power supply Check the mains connection
to the base
The handset is not registered on
the base
Register the handset on the
base
Base or handset do not ring The ringing volume is off or low Adjust the ringing volume
Tone is good, but there is no
communication
The dialing mode is wrong Adjust the dialing mode
(pulse/tone)
Not possible to transfer a call
on PABX
The flash time is too short or too
long
Change the flash time
Telephone does not react
when pressing the keys
Manipulation error Remove the batteries and put
them back in place
#
#
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Esscom BUTLER E465 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Esscom BUTLER E465 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info