757310

ESQ Fusion Chronograph Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
2. Press button A a second time to stop chronograph.
3. Press button A again to resume measurement.
4. Press button A a fourth time to stop chronograph again.
NOTE: Each time you stop chronograph, chronograph hands will indicate
total accumulated time.
5. Repeat steps 1 and 2 to add each additional interval of time.
6. After you have taken your final accumulated time reading, press
button B to reset chronograph hands to zero.
Split-time or intermediate time functions:
To take intermediate time readings as a race progresses:
1. Press button A to start chronograph.
2. Press button B to momentarily stop chronograph.
3. Read off the intermediate time, for example: 20 minutes,
26 seconds, 3/10 of a second.
4. Press button B to resume chronograph function.
Hands will catch up with ongoing event.
5. To read a second split time, press button B again.
Repeat steps 2 through 4 to take any additional split times.
6. Press button A to stop chronograph.
7. Take a reading of the final time, for example: 57 minutes,
3 seconds, 7/10 seconds.
8. Press button B to reset chronograph hands to zero.
To Synchronize Chronograph Hands:
After a battery change or in the event of an error, you may need to
manually adjust one or more chronograph hand to align them all
correctly at their zero positions.
NOTES: Once in corrective mode, each press and release on
push-button A will advance active chronograph hand by one increment.
To advance hand rapidly, depress and hold push-button A.
1. Pull crown out to position 2.
2. Press and hold push-buttons A and B simultaneously for at least 2
seconds to enter corrective mode. When chronograph seconds hand
C rotates 360o, corrective mode is activated; release buttons A and B.
3. Adjust center-mounted chronograph seconds hand C using
push-button A.
4. When hand C reaches zero position, press push-button B .
5. Now press push-button A to adjust tenths-of-a-second
counter hand G.
6. When hand G reaches zero position, press push-button B.
7. Use push-button A again to adjust minute counter hand E.
8. When hand E reaches zero position, push crown back in to position 1.
Timing hands are now synchronized at zero position, and chronograph is
ready for use.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ESQ Fusion Chronograph at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ESQ Fusion Chronograph in the language / languages: English as an attachment in your email.

The manual is 0,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info