783506
20
Zoom out
Zoom in
Previous page
1/29
Next page
3938
5.6 Wash the removable parts thoroughly
and rinse them under running water. Dry
thoroughly before placing them back on
the housing. If necessary, wash the parts in
lukewarm soapy water.
Do not wash in dishwasher or hot water to
avoid wear and deformation of the parts.
Dry the parts and follow the steps in
'Assembling the Smart Slow Juicer' to
reassemble the device.
Smart Slow Juicer
User Manual
Cleaning brush
Container for juice
Container for pulp
Pusher
Technical specifications
Package contents
Model: EP6900
Voltage: 230V~ 50/60Hz
Power: 150 W
Net weight: 4,4 kg
Dimensions (HxWxD): 525 x 221 x 176 mm
Rotation speed of press screw: 50 RPM
Maximum continuous operating time: 15 minutes
Interval between each use: 5 to 20 minutes
Troubleshooting
Problem Possible cause Solution
The device is connected
to the mains but does
nothing when the
Start (on/off) button is
pressed.
The plug is not fully inserted into the
socket.
The overload and damage protection
system is activated after prolonged use
of the unit.
The components of the Smart Slow Juicer
are not assembled correctly.
Plug the power cord securely and
completely into the power outlet.
Unplug and let cool for 30 minutes.
Then try again.
Reassemble the Smart Slow Juicer
according to the instructions in
'Installing the Smart Slow Juicer'.
Strange smell
at first use.
When using a new appliance for the first
time, an odour may be released.
If the smell persists after several uses,
contact your point of purchase.
The Smart Slow Juicer
no longer works during
operation.
Too many ingredients can cause a
blockage in the press chamber.
The overload and damage protection
system is activated.
Use the reverse button to remove the
blockage. Add ingredients more slowly
and do not press too hard. Use harder
fruit in combination with softer fruit. Cut
into smaller pieces.
Unplug and restart the unit after a 30
minute break.
The juice contains too
much pulp.
The plastic filter may be damaged
The plastic filter is not mounted or not
mounted correctly
Replace the plastic filter
Position correctly according to 'Installing
the Smart Slow Juicer'.
Strong vibrations and
a strange sound occur
during the first use.
The filter or the pressure screw is not
correctly fitted or is damaged.
The motor has been damaged during
transport or by a fall.
Fit correctly according to 'Installing the
Smart Slow Juicer' or replace.
Please contact the point of sale.
Juice is leaking between
the upper part and the
housing.
The rubber seals in the pressing chamber
are incorrectly mounted, damaged or
worn.
Attach the seals correctly or replace
them. The rubber lip should be in the
pulp outlet and the round ring on the
middle part of the press chamber.
Always position in this way before
pressing.
The hopper does not fit
properly on the press
chamber.
The filter or the pressure screw is not
correctly mounted.
Assemble the filter and squeezing screw
correctly according to 'Assembling the
Smart Slow Juicer' so the plastic filter
and squeezing screw are correctly
positioned on the press chamber.
These are the most common problems and solutions. For any other questions, please contact your
local Smart Slow Juicer dealer.
Note: The warranty will be voided if repairs are made to the Smart Slow Juicer and the housing is
opened unless this is done by an authorised Espressions service point.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Espressions EP6900 s Smart Slow Juicer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Espressions EP6900 s Smart Slow Juicer in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info