505377

Espressione 26160 - 3 in 1 Manual

13
Zoom out
Zoom in
Previous page
1/54
Next page
EN
11
Scale removal from the espresso coffee circuit
To remove the scale, proceed as follows:
- Switch off the machine and unplug it from the mains power.
If the appliance is disconnected from the mains power, the settings will all be reset.
- Pour the contents of the sachet in a litre of water, taking care to allow the product to dissolve comple-
tely.
- Pour the prepared solution in the tank (7).
- Place a container with a capacity of at least half a litre under the fi lter holder. Press the 1 cup/ 2 cup
button (l) to switch on the machine. When the light on the “ESPRESSO” button (L) stops fl ashing,
press it and pour about half of the tank’s contents. Stop pouring by pressing the “ESPRESSO” button
(L). Wait for about 15 minutes and then pour out the other half of the contents of the tank.
- Switch off the machine by pressing the 1 cup/2 cups button (I) three times and unplug the machine.
- Refi ll the tank to the MAX level with fresh still water.
- Place a container with a capacity of at least half a litre under the fi lter holder seat.
- Press the 1 cup/ 2 cup button (l) to switch on the machine and start the espresso coffee function.
When the “ESPRESSO” button (L) light stops fl ashing, press the button and pour out about half of the
contents of the tank.
- Stop pouring by pressing the 1 cup/ 2 cup button (l) three times. Wait for about 15 minutes and then
pour out the other half of the contents of the tank.
- At this point the appliance is once again ready for use.
Scale removal from the drip coffee circuit
To clean and remove scale, proceed as follows:
- Switch off the machine and unplug it from the mains power.
If the appliance is disconnected from the mains power, the settings will all be reset.
- Pour the contents of the sachet in a litre of water, taking care to allow the product to dissolve comple-
tely.
- Pour the prepared solution in the tank (7).
- Place the carafe (2) under the dispenser (11) (Fig.7).
Press the AUTO/CAFFE button (E) twice and after a few seconds, the solution will start to come out
of the pour nozzle (27). Pour out about half of the tank’s contents. Stop the pouring by pressing the
AUTO/CAFFE (E) button for the third time. Wait for about 15 minutes and then pour out the other half
of the contents of the tank.
- Switch off the machine and unplug it from the mains power.
If the appliance is disconnected from the mains power, the settings will all be reset.
- Refi ll the tank to the MAX level with fresh still water.
- Place the carafe (2) under the dispenser (11) (Fig.7).
Press the AUTO/CAFFE button (E) twice and after a few seconds, water will start to come out of the
pour nozzle (27). Pour out about half the contents of the tank.
- Stop pouring by pressing the AUTO/CAFFE (E) button for the third time. Wait about 15 minutes and
then pour out the other half of the contents of the tank.
- At this point, the appliance is once again ready for use
It is important that during this operation, you use the carafe (2) provided, since the lid (3) has a
spout that serves to open the valve of the dispenser (11)
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Espressione 26160 - 3 in 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Espressione 26160 - 3 in 1 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info