505377
9
Zoom out
Zoom in
Previous page
1/54
Next page
EN
7
HOW TO MAKE CAPUCCINO
• Pour approximately 200ml of skimmed milk into a small but high container into which the steam wand
(13) can be inserted.
Please Note: use quality, fresh and cold milk; the container must be cold, too, therefore do not
rinse with warm water before the use.
• Position the steam dispensing valve (12) in position ‘ ’.(Fig.8)
• Place a container with milk under the steam wand (13).
• Press the button 1 cup/2 cups (I), the button “ESPRESSO” starts ashing.
• Once the button “ESPRESSO” turns off, rotate the steam dispensing valve (12) anti-clockwise slowly
to “MAX” position direction.
• During the froth preparing phases, be careful the capuccino maker (14) does not touch the container
bottom to avoid obstruction of steam dispensing.
• Once having got the froth (this could take 10-30 seconds), reposition the steam dispensing valve (12)
into position ‘ and remove the container.
After the above steps, dispense steam for few seconds to clean the hole of the steam wand (13) and
remove possible milk remains. Clean the outside part of the steam wand and the capuccino maker
(14) by means of a damp cloth.
Warning!
Do not touch the steam nozzle parts during the dispensing phases as they are very hot. Burn
hazard.
Use only containers with material suitable for high temperatures (ceramic or steel).
SETTABLE FUNCTIONS
The machine is equipped with three settable functions.
• Drip coffee auto start time setting.
• Heat maintaining time setting.
• Digital clock setting.
When the appliance is connected to an electric socket, the “LCD Display” (24) shows the default time
setting by proposing the value 12:00AM.
At every press of the button “PROG” (F) the following function is selected:
Drip coffee auto start (in hours)
Drip coffee auto start (in minutes)
Heating plate heat maintaining (in hours)
Clock (in hours)
Clock (in minutes)
Exit (settable functions)
Please Note: In programming mode, in case of a delay over 10 seconds between the press of a
button and the next one, the program quits automatically the programming mode by maintaining
the last shown values, then the display turns off.
If the appliance is disconnected or blackout occurs, settings are resetted.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Espressione 26160 - 3 in 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Espressione 26160 - 3 in 1 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info