505377

Espressione 26160 - 3 in 1 Manual

6
Zoom out
Zoom in
Previous page
1/54
Next page
EN
4
PRELIMINARY USE STAGES
Operation
Make sure that the domestic mains voltage is the same as that on the appliance rating plate. Place the
machine on a fl at surface.
Open the tank cover (7).
Fill the tank with tap water (max. 15° hardness) (Fig. 3).
NEVER fi ll the tank above the MAX level.
Plug the appliance into the mains socket, which must be earthed.
First Use
Before using the appliance for the fi rst time and also after a long period of non-use,
prepare several cups of water (without any coffee) to rinse the system through com-
pletely:
To rinse the Espresso and cappuccino maker
• Place one of the three fi lters in the fi lter holder (22)
• Tighten the fi lter holder on the left facing the external marking and turn it fi rmly to the right
• Place a large enough container under the fi lter holder.
• Turn steam control knob (12) to close position ‘●’
• Press “1cup/2cups” button on (I), then continue to press “ESPRESSO” button (L).
So the pump is then activated. If the boiler tank (water heating system) is empty (on fi rst use for
example) it will fi ll with water with a characteristic fi lling noise.
As soon as the water is running out of the fi lter holder, press “ESPRESSO” button (L) off.
• Allow the appliance to fi nish heating the water.
• Once the “ESPRESSO” light, (L) is off, press “ESPRESSO” button (L) again, allow 1 cup (green light)
water to run through button (I).
Repeat the action and pour the equivalent of two cups of water, pressing the button (I) (red light) and
three cups of water pressing the button (I) (blue light), interchanging the three fi lters every time.
Important!
After pouring coffee, wait at least ten seconds before disengaging the fi lter holder, turn it slowly to
from right to left, to prevent sprays or splashes of water or coffee.
Important!
Like on professional coffee machines, never remove the fi lter holder when the machine is opera-
ting; scalding hazard!
• Interrupt each time the process by pressing “ESPRESSO” button again.
To rinse the steam wand
• Place a container under the steam wand (13)
• Turn the steam control knob to ‘ ’ position
• As soon as the “ESPRESSO” light is off, slowly turn the steam control knob (12) to ‘MAX’ direction and
allow the steam to escape for about 10 seconds.
• Turn steam control knob (12) to close position’’●’
• Press “1cup/2cups” button (I) until the lit indicator switches off.
Important!
During the steam dispensing stage, never touch the surface of the steam wand, as they are very
hot. Danger of scalding.
It is also necessary to use containers in a material suitable for high temperatures (ceramic or
steel).
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Espressione 26160 - 3 in 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Espressione 26160 - 3 in 1 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info