480743
14
Zoom out
Zoom in
Previous page
1/31
Next page
Not for Commercial Use
Ericsson Mobile Communications AB
Receiving a Call
When you receive a call, the phone rings and the indica-
tor light on top of the phone blinks green rapidly. The
display shows ‘Answer?’.
If your subscription includes the Calling Line Identifica-
tion service and the caller’s network sends the number,
you will see the caller’s number at the bottom of the
display. If the number is stored with a name in the
phone book, the name will be shown in the display.
Note! The phone must be turned on and within coverage of a
network before a call can be received.
To Answer the Call
Press YES.
When the call is finished, press NO.
Tip! To mute the ring signal when you receive a call, press
CLR.
To Reject the Call
There are two ways of rejecting the call:
Press the
NO key.
Press the volume key on the side of the phone
twice.
The caller will hear a busy tone if the caller’s network
supports this function. If ‘Divert on busy’ is activated,
the incoming call is diverted to the number you have
specified (see ‘Diverting Incoming Calls’).
Redialling a Number
Your S 868 conveniently lets you redial the last phone
numbers you have called (15 or more, depending on
your SIM card). It can also redial a number auto-
matically if the connection failed when you first called.
To Redial Previously Called Numbers
Press YES. The display now shows the last di-
alled number.
Press the navigation key RIGHT or LEFT until the
number you want to call is shown on the
bottom row of the display.
Press YES to make the call.
Note! If you want to clear the last dialled numbers memory,
do the following:
Press the navigation key LEFT. The ‘Phone book’
menu appears.
Press YES to enter the ‘Phone book’ menu.
Press the navigation key LEFT until the ‘Dialled
numbers’ function appears.
Press YES to select the ‘Dialled numbers’ func-
tion.
Press and hold the CLR key. The question ‘Erase
all?’ appears.
Press YES to erase the last dialled numbers from
the memory.
Press CLR to return to standby mode.
The Automatic Redialling Function
If the connection fails and the receiver’s network
supports it, the display shows ‘Retry?’ on the top row
and the reason for the failure on the second row.
To redial the number automatically:
l Press YES.
The number will automatically be redialled
until the call is answered, up to 10 times.
If you press any key or receive a call, the re-
dialling will be interrupted.
If the redialling is successful, the phone will
beep and then you will hear a ring signal.
If you do not want to retry, press NO.
10 Press to enter the menu system. See inside the cover.
Receiving a Call
When you receive a call, the phone rings and the indica-
tor light on top of the phone blinks green rapidly. The
display shows ‘Answer?’.
If your subscription includes the Calling Line Identifica-
tion service and the caller’s network sends the number,
you will see the caller’s number at the bottom of the
display. If the number is stored with a name in the
phone book, the name will be shown in the display.
Note! The phone must be turned on and within coverage of a
network before a call can be received.
To Answer the Call
Press YES.
When the call is finished, press NO.
Tip! To mute the ring signal when you receive a call, press
CLR.
To Reject the Call
There are two ways of rejecting the call:
Press the
NO key.
Press the volume key on the side of the phone
twice.
The caller will hear a busy tone if the caller’s network
supports this function. If ‘Divert on busy’ is activated,
the incoming call is diverted to the number you have
specified (see ‘Diverting Incoming Calls’).
Redialling a Number
Your S 868 conveniently lets you redial the last phone
numbers you have called (15 or more, depending on
your SIM card). It can also redial a number auto-
matically if the connection failed when you first called.
To Redial Previously Called Numbers
Press YES. The display now shows the last di-
alled number.
Press the navigation key RIGHT or LEFT until the
number you want to call is shown on the
bottom row of the display.
Press YES to make the call.
Note! If you want to clear the last dialled numbers memory,
do the following:
Press the navigation key LEFT. The ‘Phone book’
menu appears.
Press YES to enter the ‘Phone book’ menu.
Press the navigation key LEFT until the ‘Dialled
numbers’ function appears.
Press YES to select the ‘Dialled numbers’ func-
tion.
Press and hold the CLR key. The question ‘Erase
all?’ appears.
Press YES to erase the last dialled numbers from
the memory.
Press CLR to return to standby mode.
The Automatic Redialling Function
If the connection fails and the receiver’s network
supports it, the display shows ‘Retry?’ on the top row
and the reason for the failure on the second row.
To redial the number automatically:
l Press YES.
The number will automatically be redialled
until the call is answered, up to 10 times.
If you press any key or receive a call, the re-
dialling will be interrupted.
If the redialling is successful, the phone will
beep and then you will hear a ring signal.
If you do not want to retry, press NO.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ericsson S868 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ericsson S868 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info