480732

Ericsson GH198 Manual

49
Zoom out
Zoom in
Previous page
1/68
Next page
20. Phone Lock
The Phone Lock function allows you to prevent
unauthorized use of your phone in the event of a theft.
Emergency calls (112) can, however, be made
when the phone is locked.
There are two levels of locking the phone: Full lock and
Autolock.
Full lock:
If the full lock is enabled, the message ‘‘PHONE LOCK’’ is
displayed briefly, followed by the question ‘‘CODE?’’, each
time the phone is turned ON. The user then has to enter a
security code to be able to use the phone.
Auto lock:
If the autolock is enabled, the message ‘‘PHONE LOCK’’
and the question ‘‘CODE?’’, will not appear in the display
unless a different SIM has been inserted in the phone.
After the security code has been entered correctly, the phone
can be used with new SIM. Not until the original SIM or a
different SIM is inserted in the phone, will the user be
asked to enter the security code again.
Observe the following:
Your phone is factory-programmed with a 4-digit
security code of 0000. To improve security, you
should change this to any 3- to 8-digit personalized
code.
Should you forget your security code, contact an
authorized dealer. Be aware of that it, for security
reasons, might take same time to solve the
problem. You are, therefore, advised to select your
security code carefully. You can, for example, use
the same code as your PIN, or another code that you
will remember easily.
Changing your security code:
1. Press M and then enter 20. ‘‘PHONE LOCK’’ is
displayed.
2. Press any numeric key repeatedly until
‘‘CHG CODE’’ (Change Code) is displayed.
3. Press S. ‘‘OLD?’’ is displayed.
4. Enter the present security code and press S.
‘‘NEW?’’ is displayed.
5. Enter the new 3- to 8-digit security code and press
S. ‘‘AGAIN?’’ is displayed.
6. Enter the new security code again and press S.
If you entered the old code and the new code
correctly ‘‘NEW CODE’’ appears briefly. The
display then returns to normal.
If you entered any of the codes
incorrectly, a beep is heard and ‘‘ERROR’’ is
displayed briefly. The display then returns to normal.
Special Functions
44
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ericsson GH198 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ericsson GH198 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info