480734

Ericsson GF388 Manual

34
Zoom out
Zoom in
Previous page
1/51
Next page
b. Store the number in the selected position,
thus erasing the old number (and name).
Press YES.
Card memory full
If you try to store a phone number when all
positions are occupied, a position number in the
Phone memory will be suggested in the top line
of the display.
Both memories full
If both memories become full, no position
number will be suggested,
If you do wish to store the phone number, you
have to enter the number of an already occu-
pied position, thus erasing the old number
(and name).
To recall a phone number using the
name –
Name recall
To recall a phone number using the
position –
Position recall
To store a phone number –
Store
Storing phone numbers in the Card memory,
and recalling phone numbers from the Card
memory, is described in the Basic Guide.
If you wish to store a phone number in the
Phone memory, press # to enter the ¤ charac-
ter. For example, press # followed by 1 to store
a phone number in memory position ¤1. The
same applies when you recall a phone number
using Position recall.
The procedure for recalling a phone number
using Name recall is the same, regardless of
whether the phone number is stored in the Card
or Phone memory.
Alternative method to recall a phone number
using the name
Press CLR to erase any digits from the display.
Press , followed by a numeric key and YES.
For example, to recall a name beginning with A,
press the 2 key. To recall a name beginning with
E, press the 3 key twice.
If the name displayed is not the desired one,
scroll with or .
To change a phone number, name or
storage position –
Edit
Enter the Phone book menu and select Edit.
a. Enter the position number and press YES.
b. If you wish to enter the name, press .
Enter the full name and press YES.
You can now change the position number (in
the top line), the name (in the middle line) or the
phone number (in the bottom line). You can
move the cursor to the desired line with /
and then make the changes. Use the CLR key
to erase. When you are finished, press YES.
If you did not change the position number, the
message Used Overwrite? is displayed, indi-
cating that the edited name or phone number
will be stored in its old position. Press YES.
To erase a phone number –
Erase
Enter the Phone book menu and select Erase.
Menus
34 EN/LZT 126 1298 R1A
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ericsson GF388 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ericsson GF388 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info