541676
47
Zoom out
Zoom in
Previous page
1/164
Next page
Living 6
Touring - 03/11-1 - englisch (EN) - 0731070 - HYW-0102-01EN 47
6Living
Chapter Overview
This chapter contains instructions about living in the caravan.
The instructions address the following topics:
heating the caravan
ventilation of the caravan
opening and closing the hinged windows
opening and closing the lifting roof
modifying the table surfaces
removing tables
extending the seating group (Troll)
use of the beds
6.1 Heating
6.2 Ventilation
Ensure that there is a continuous exchange of air by providing frequent and efficient ventilation. This
is the only method for ensuring that condensation is not formed during cool weather. During the
colder season, a comfortable living climate is created by a balance of heating performance, air dis-
tribution and ventilation. If the caravan is laid up for a longer period, occasionally ventilate it
well, especially in summer as heat accumulation can occur.
During heater operation, the exhaust gas pipe in the wardrobe will get hot. Therefore
do not keep any heat-sensitive garments right next to the exhaust gas pipe (see also
chapter 9).
The oxygen in the vehicle interior is used up by breathing or the use of the gas cooker
etc. and must therefore be continuously replaced. For this reason the caravan fea-
tures forced ventilations. Never cover or block forced ventilations with objects as e. g.
a winter mat. Keep forced ventilations clear of snow and leaves. There is a danger of
suffocation due to an increased CO
2
level.
The lifting roof is fitted with ventilation zips which can be opened for additional venti-
lation
> Although sufficient ventilation is provided, in certain weather conditions, condensation
can form on metal objects (e. g. screwed connections in the floor).
> In extreme weather conditions, condensation can form on the double-glazed acrylic
glass. The glass is so designed that condensation can evaporate when the outside
temperature is increased. There is no danger of the double-glazed acrylic glass being
damaged by condensation.
> Additional cold spots can occur at thermal "bridges" (e. g. lifting roofs, sockets, filler
necks, flaps, etc.).
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eriba Touring at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eriba Touring in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info