757008

Ergofix BV 20 B-L Manual

17
Zoom out
Zoom in
Previous page
1/32
Next page
BV 20 B-L
15
6. INSTALLATION AND TEST RUN
1 Having unpacked the box, you should check if all the accessories are
complete.
2 The lathe should be installed on a rigid bed plate made of wood or iron, to
prevent the machine from vibrating when it starts running; this will have an
effect on the accuracy of its operation.
3 Please use a leveller to level off the lathe while installing it.
4 All parts must be cleaned with gasoline or coal oil.
5 Fully fill up the lubricating holes and the lubricating surfaces at different
parts of the machine tool with lube, check all the operating hands to see
whether the tightness is proper of the longitudinal travel of saddle and the
transverse movements of carriage, otherwise making adjustment with plug
iron.
6 Before the start-up of the machine tool, you must make a thorough check
over all the electric parts of the motor so as to avoid the current leakage
and any other accidents because of the damage of electric circuit during the
transportation.
7 Please check the tringle belt pulley to see whether the tightness is proper,
otherwise making an adjustment with the middle belt pulley.
8 On the first starting of test run, you should select the lowest step of running
speed and start the machine tool to run for 20 minutes to see if there is any
unusual phenomenon with it, if there is not, you can increase the running
speed gradually.
7. OPERATION AND MAINTENANCE
Regular maintenance will increase durability and reliability.
▪ Change the lube inside the headstock at least once a year.
▪ Every day, before setting to work, you should fill up the lubricating holes at
different parts of the lathe with machine oil.
▪ In use, chips falling onto all the sliding surfaces should be cleaned in time.
▪ After having done the work each day, you must clean out the chip and wipe all
parts of the machine tool, and coat it with machine oil in order to prevent the
machine from rusting.
▪ To change the rotational speed of the spindle box, first of all, you must stop
the machine, and switch it according to the required speed and refering to the
operating position on the indicating plate.
▪ In use, pay attention to avoid the machine oil splashing into the inside of the
motor or onto the triangle belt pulley, or the electric motor and the triangle belt
will be damaged. The triangle belt would be lengthened after being used for a
certain period of time, it’s tightness can be adjusted with the motor slide and
the middle belt pulley.
▪ Do not place any tools, parts and other sundries on the surface of the
guideway so as to avoid the damage to the accuracy of the guideways.
▪ If you want to change the direction of the motor rotation, you must key STOP
firstly.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ergofix BV 20 B-L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ergofix BV 20 B-L in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info