621620

Ergofix 79585 Manual

18
Zoom out
Zoom in
Previous page
1/36
Next page
17
3. SAFETY INSTRUCTIONS
1. Read and understand owner’s manual before use.
2. The plug of the lathe should be connected to a proper grounding type
receptacle.
3. Keep all guards in place during operation.
4. Remove adjusting keys and wrenches before turning on the lathe.
5. Keep work area clean; floor must not be slippery due to wax or sawdust.
6. Do not use power tools in damp or wet locations or expose them to rain. Keep
work area well lighted and provide adequate surrounding work space.
7. Keep children away from the work area.
8. Make workshop kid-proof with padlocks or removing starter keys.
9. The lathe will do the job better and safer when operated at the proper speed.
10. Do not force tool or attachment to do a job for which it was not designed.
11. Do not wear loose clothing, gloves, neckties or jewelry (rings, wristwatches)
that can get caught in moving parts. Nonslip footwear is recommended. Wear
protective hair covering to contain long hair. Roll long sleeves above the
elbow.
12. Wear safety goggles at all times. Also use face or dust mask if cutting
operation is dusty and ear protectors during extended periods of operation.
13. Mount workpiece securely between centers.
14. Keep proper footing and balance at all times.
15. Keep tools sharp and clean for best and safest performance. Follow
instructions for lubricating and changing accessories.
16. Before servicing, changing accessories or attachments make sure that the
switch is in “OFF” position and that the plug is removed from the power
source.
17. Use only recommended accessories to prevent accidents.
18. Never stand on the lathe.
19. Apply cutting tool to the workpiece against the direction of the spindle rotation.
Use lowest speed when starting new workpiece.
20. Never leave the lathe running unattended; turn the power “OFF” and do not
leave the lathe until it comes to a complete stop.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ergofix 79585 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ergofix 79585 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info