Manual Ergofix 77251 (page 13 of 28) (English, German, Dutch, French)

621615

Zoom out

Zoom in

1/28

- moving the machine.

Never leave the machine unattended with the power supply "on".

• Always set tree trunks firmly on the log retaining plates and work table. Make

sure tree trunks will not twisk, rock or slip while being cut. Do not force the

machine, this will brake the blade or damage the machine.

• Keep hands and feet away from moving parts and do not hold the log with

your hand during the cutting stroke.

• Do not use the machine if damaged, any suspect parts are noted or it has

been subjected to a shock load.

• If the log cutter needs repairing and/or there are any parts which need to be

replaced, have it repaired by authorized technicians and only use the

replacement parts supplied by the manufacturer.

• WARNING: the warnings, cautions and instructions discussed in this

instruction manual cannot cover all possible conditions and situations that

may occur. It must be understood by the operator that common sense and

caution are factors which cannot be built into this product, but must be

supplied by the operator.

• Only those persons who are aware of how to use the log splitter, by having read

this manual, should use the splitter. Injudicious use may cause danger.

4. SET UP FOR OPERATION

Unpack the machine and check if all the parts are present (see page 17).

WARNING! Ensure that you read, understand and apply the safety

instructions and warnings before use.

MONTAGE

Assemble the machine according to the pictures 1 untill 5 on page 18.

Then proceed as follows(see page 19):

1. Fix the machine with bolts to the floor, so the machine cannot fall over (see

page 22).

2. Mount the left and right small movable guard (1 and 2) for blade on the

suitable position of worktable (4) and fix them with bolts ((3).

3. Mount the baffle (5) on the top position of worktable (4) and fix it with bolts

(6).

4. Enlarge the angle between worktable and tilting support stand (7) and put the

spring (9) into the steel pipe (11) as on the picture.

5. Put the steel pipe with spring into the big hole of bracket (10), then put the

pin (8) into the small hole of bottom of steel pipe and bend the head of the

pin with plier.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ergofix 77251 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ergofix 77251 Manual

Product: