621614

Ergofix 77250 Manual

12
Zoom out
Zoom in
Previous page
1/28
Next page
10
3. SAFETY INSTRUCTIONS
Working with log cutters is not without danger. To reduce this danger as much as
possible, we have drawn up a number of safety measures. Always follow up these
directives and always be aware of what you are doing. In this way many accidents
can be avoided.
• The machine must always be used by one operator only.
• Nobody must be allowed to use the log cutter unless they have read the
instruction manual and have been instructed in the regulations to follow for
correct and safe use.
• The machine must be used by adults only. Use of the log cutter by apprentices
of not less than 16 years of age must be supervised by an adult authorised to
use the machine.
• Keep children and visitors away from the working area.
• Do not wear loose clothing or neckties that can get caught in moving parts.
Wear safety goggles at all times. Nonslip footwear is recommended. Wear
protective hair covering to contain long hair.
• Do not use the log cutter in wet or damp areas or expose the machine to rain.
• Only use this cutter on a surface that is stable, level, dry and not slippery,
and capable of sustaining the load. Keep the surface clean, tidy and free
from unrelated materials and ensure that there is adequate lighting.
• Do not use the machine in areas where fumes from paint, solvents or
flammable liquids pose a potential hazard.
• Never leave the machine unattended while it is running. If you leave the
machine, even for a short time, remove the power supply or any possible cause
of accidental start-up.
• The log cutter must never be used by an operator who is under the influence of
alcohol, drugs, medicines, or who is tired. A clear mind is essential for safety.
• Check that the electric circuit is adequately protected and that it corresponds
with the power, voltage and frequency of the motor. Check that there is a
ground connection and a regulation differential switch upstream.
• Use cables with a section of 3 x 2,5 mm². Avoid use of free and inadequately
insulated connections. Connections must be made with protected materials
suitable for outdoor use. Do not use cables over 10 metres long, as excessively
long cables or those with inadequate section can cause voltage drops that
prevent motor from developing its full power.
• Never open the pushbutton box on the motor. Should this be necessary,
contact a qualified electrician.
• Make sure that the machine and the cable never come in contact with water.
• Treat the power cable with care. Do not attempt to move the machine by pulling
the cable. Do not yank the cable to unplug it; keep the cable away from
excessive heat, oil and sharp objects.
• Always disconnect the power cable when:
- you leave the machine, even for a short time
- the machine is not in use
- carrying out maintenance work
- changing attachment
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ergofix 77250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ergofix 77250 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info