520011
14
Zoom out
Zoom in
Previous page
1/88
Next page
Safety information
Technical and optical modifications as well as misprints reserved - © 2019 by ERGO-FIT GmbH & Co. KG
Keep the SPO
2
module away from any liquid as well as any condensations.
⊗ Nail polish or artificial nails can influence the SPO
2
measurement. Remove nail
polish or artificial nails before using the sensors.
⊗ Taking medicine that changes the blood color, the administration of intravascular
dyes or a high concentration of dysfunctional hemoglobin can lead to incorrect
results.
Intense light such as OP lamps, bilirubin lighting, fluorescent lamps, infrared heat
lamps and direct sun light can lead to incorrect SPO
2
results.
Using third-party parts can cause malfunction and loss of biocompatibility. Only use
original parts and sensors.
Do not use the device if you suffer from edemas, skin irritations or have an open
wound.
Do not attach the SPO
2
sensor to limbs with blood pressure cuff.
All safety instructions in this manual are based on many years of experience and
selfconception.
2.2 Operational safety - what needs to be done
After delivery, make sure that the machine has not been damaged during transport.
In case of doubt, contact our customer service and do not start the machine.
Slots and openings on the machine serve as ventilation. Do not cover these
openings, because this can cause the elements to overheat.
Check if the power connection cords are damaged before starting the machine.
Switch off the machine after training and disconnect it from the grid.
Set up the training machine so that there is sufficient open space around it (at least
1 m) to avoid any danger for the user or others. The user will not collide and in
addition, this prevents interferences in heart rate measuring.
The provisions EN 60601-1-1:2001 (medical electrical equipment) are valid for
machines of the series CARDIO LINE 400 MED.
2.3 Caution: Risk of electric shock
Only connect your machine to an appropriate mains supply (see Chapter 5.4.1).
Make sure to have the right climate conditions (see Chapter 5.3).
Do not use damaged power cords.
To unplug the cord, grasp the plug and not the cord. Do not unplug by pulling on the
cord.
The machine must not be opened before it is switched off and unplugged.
If liquid gets inside the machine, disconnect the plug immediately and call the
customer service.
8
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ergo-fit Cardioline 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ergo-fit Cardioline 400 in the language / languages: English as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ergo-fit Cardioline 400

Ergo-fit Cardioline 400 User Manual - German - 116 pages

Ergo-fit Cardioline 400 User Manual - Dutch - 92 pages

Ergo-fit Cardioline 400 User Manual - French - 94 pages

Ergo-fit Cardioline 400 User Manual - Spanish - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info