779795
33
Zoom out
Zoom in
Previous page
1/37
Next page
EN
33
Storage
1. Switch the product off and disconnect it from the power supply.
2. Clean the product as described above.
3. Slide the cutting head fully forwards and tighten the slide locking knob (8) if
necessary.
4. Follow the reverse order of “Assembly Operation position” to set the product at
locking position.
5. Store the product and its accessories in a dark, dry, frost-free, well-ventilated
place.
6. Always store the product in a place that is inaccessible to children. The ideal
storage temperature is between 10 °C and 30 °C.
7. We recommend using the original package for storage or covering the product with
a suitable cloth or enclosure to protect it against dust.
Troubleshooting
Therefore check the product using this section. In most cases the problem can be
solved quickly.
WARNING! Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed
cannot solve the problem yourself!
Problem Possible cause Solution
1. Product does not
start
1.1. Not connected to power
supply
1.2. Power cord or plug is
defective
1.3. Other electrical defect to
the product
1.1. Connect to power supply
1.2. Check by a specialist
electrician
1.3. Check by a specialist
electrician
2. Product does not
reach full power
2.1. Extension cord not
suitable for operation
with this product
2.2. Power source (e.g.
generator) has too low
voltage
2.3. Air vents are blocked
2.1. Use a proper extension
cord
2.2. Connect to another power
source
2.3. Clean the air vents
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Erbauer EMIS216S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Erbauer EMIS216S in the language / languages: English as an attachment in your email.

The manual is 5.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info