650396
21
Zoom out
Zoom in
Previous page
1/53
Next page
40 4140 41
7. Adapting run
After the batteries have been inserted, the motor rst travels
back, during which the date, „INS“ and the activity sym-
bol
are displayed. As soon as „INS“ without the activity
symbol
is displayed, the programmable radiator control
unit can be installed. An adapting run (AdA“) is performed
after installation to adapt to the valve.
• Place the programmable radiator control unit on the val-
ve.
• Tighten the union nut rmly.
• Press the OK key , when „INS“ is shown in the display.
The actuator carries out an adapting run. During this time
AdA“ and the activity symbol
are shown in the display
and operation is not possible.
If the adapting run is initiated before installation, press
OK and the motor travels back to the „INS“ position.
If an error message (F1, F2, F3) is displayed, the motor
similarly travels back to the „INS“ position.
8. Setting the weekly program
Up to 3 heating phases (7 switching time points) can be set
separately for each weekday in the weekly program. The
programming is done for the selected days and tempera-
tures must be stored for a time period from 00:00 to 23:59.
• Press the Menu key longer than 3 seconds. „PRO“ ap-
pears in the display. Conrm with the OK key.
• DAY“ appears in the display. With the selector dial can
be selected an individual weekday, all working days, the
weekend or the whole week (example working days).
• Conrm with the OK key.
• The rst switching time point is dis-
played (0:00), this can not be chan-
ged. The heating times are also dis-
played as bars.
• Conrm with the OK key.
• After this you can set the temperature which is desired
from 0:00 (example 17.0 °C).
• Conrm with the OK key.
• The next switching time point is dis-
played (example 6:00). You can ad-
just this individually.
• Finally set the temperature which
should prevail from 6:00.
• You can repeat this procedure un-
til all the other desired temperatu-
res for the time period from 0:00 to
23:59 have been stored.
• If all 7 switching time points have
been allocated, 23:59 is displayed
as the nal switching point to be
conrmed.
The temperature can also be changed in Auto Mode at any
time via the selector dial.The changed temperature is then
retaineduntil the next switching time point.
8.1. Weekly program: examples
Up to 3 heating times (7 switching time points) with individual
temperature setting can be stored for each weekday with the
programmable radiator control unit.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EQ-3 CC-RT-O-CnL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EQ-3 CC-RT-O-CnL in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info