Manual EQ-3 CC-RT-O-CnL (page 18 of 53) (English, German, Dutch, French)

650396

Zoom out

Zoom in

1/53

34 3534 35

Removing the old thermostat head

Turn the thermostat head to the maximum value (A) in an

anticlockwise direction. The thermostat head does not

now press on the valve spindle and it can therefore be re-

moved more easily

There can be different types of thermostat head xing:

• Union nut: Unscrew the union nut in an anticlockwise di-

rection (B). Then you can remove the thermostat head (C).

• Snap-on fastenings: You can easily release thermostat

heads fastened in this way by turning the closure faste-

ning/union nut a small amount in an anticlockwise direc-

tion (B) Then you can remove the thermostat head (C).

• Clamping screw connections: The thermostat head is

held by means of a fastening ring, which is held together

by a screw. Release this screw and remove the thermo-

stat head from the valve (C).

• Screw connection with setscrews: Release the setscrew

and remove the thermostat head (C).

6.1. Adapters for Danfoss

One of the enclosed adapters is required for installation

on Danfoss valves. The arrangement of the suitable ad-

apter ring for the appropriate valve can be found in the

following gures:

Take care during installation that you do not trap your

ngers between the two halves of the adapter!

The Danfoss valve bodies have elongated indentations (E)

running all around (see arrow), which also ensure better

seating of the adapter after it has been latched into place.

When installing, please ensure that the spigots inside

the adapter (D) are in the same position as the inden-

tations (E) on the valve.Latch the adapter, which cor-

responds to the valve, completely onto the valve body.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of EQ-3 CC-RT-O-CnL in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

EQ-3 CC-RT-O-CnL Manual

Product: