•Do not carry the projector by yourself. Two people should use the handles to carry the projector when unpacking or moving it.
•Do not place the projector on an unstable cart, stand, or table. When projecting images vertically, install the projector correctly and appropriately to
prevent it from turning over and falling.
•Do not operate the projector on its side, while tilted to one side, or upside down. Do not tilt the projector forward or back at a greater angle than that
specified for vertical keystone correction. sp.164
•If the projector is mounted on a ceiling, it should be installed by qualified technicians using mounting hardware designed for use with this projector.
Also, when mounting the projector on the ceiling, make sure to pass a wire through the handles to prevent it from falling.
•If you use a ceiling mount and apply adhesives to the mount to prevent the screws from loosening, or if you use lubricants or oils on the projector, the
projector case may crack and the projector may fall from its ceiling mount. This could cause serious injury to anyone under the mount and could damage
the projector. When installing or adjusting a ceiling mount, do not use adhesives to prevent the screws from loosening and do not use oils or lubricants.
•Do not stand on the projector or place heavy objects on it.
•Do not use the projector where it may be exposed to rain, water, or excessive humidity.
•Unplug the projector from the wall outlet before cleaning. Use a dry cloth (or, for stubborn dirt or stains, a moist cloth that has been wrung dry) for
cleaning. Do not use liquid, aerosol cleaners, or solvents such as alcohol, thinner or benzine.
•Do not use any spray containing a flammable gas to remove dirt or dust that is adhering to parts such as the lens or filter of the projector.
•Contact your dealer to clean the interior of the projector. If the interior of the projector has not been cleaned for a long time, dust may build up, which
could cause fire or electric shock.
•Never spill liquid of any kind into the projector.
•Do not use the projector where it may be exposed to excessive dust or smoke.
•Do not use the projector where it may be exposed to flammable, corrosive, or explosive gases. Because the lamp inside the projector becomes very hot
during use, the gases may ignite and result in a fire.
•Never push objects of any kind through the cabinet slots or openings.
•Do not use or store the projector or remote control in a hot location, such as near a heater, in direct sunlight, or in a closed vehicle.
•Incorrect battery usage may cause leakage of battery fluid and battery rupture, which could result in fire, injury or corrosion of the projector. When
replacing batteries, take the following precautions: Insert batteries so that the polarities (+ and -) are correct, do not use batteries of different types, do
not mix old and new batteries, and do not use any batteries other than those specified in this User’s Guide. Replace the batteries as soon as they run out
and remove the batteries if you will not be using the projector for a long period of time. Do not expose batteries to heat or flame and do not put them in
water. Dispose of used batteries according to local regulations. Keep these batteries out of the reach of children. Batteries are choking hazards and are
very dangerous if swallowed. If the batteries leak, wipe away battery fluid with a soft cloth. If battery fluid gets on your hands, wash them immediately.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Epson Z8455WUNL at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Epson Z8455WUNL in the language / languages: English as an attachment in your email.
The manual is 6,27 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
