543669
176
Zoom out
Zoom in
Previous page
1/254
Next page
Settings for Multiple Projectors
176
q
The remote control ID setting is saved in the remote control. Even if the
remote control batteries are removed to replace them and so on, the stored
ID setting is retained. However, if the batteries are left out for a long time,
it is reset to the default value (ID0).
Adjusting the Position of the Projected Image
Adjust the position of the projected image, starting from the adjustments
that have larger corrections. For the best results, use physical adjustments
(moving the projector’s position, optical zoom, and lens shift) as much as
possible to minimize the amount of digital correction (Quick Corner,
Point Correction, H/V keystone, etc.) needed to correct your images.
q
We recommend setting the focus, zoom, and lens shift at least 30 minutes
after you start the projection, because images are not stable right after
turning on the projector.
The Test Pattern can be displayed to adjust the projection status without
connecting video equipment. s p.157
When projecting from multiple projectors, correction is easier if images are
displayed as is (aspect ratio and image resolution are maintained) and
without being enlarged or reduced in size.]
We recommend projecting from the center of the lens when possible. As you
get to the edges, the lens gets thinner which can cause distortion and affect
the quality of the blend.
Point Correction
Corrects slight distortion which occurs partially, or adjusts the screen
position in an overlapping area when projecting from multiple
projectors.
A grid is placed on top of the projected image and you can move the
points of intersection on the grid left, right, up, or down to correct
distortion.
Procedure
A During projection, press the [Menu] button. Select Settings
menu - "Geometric Correction" and then press the [Enter]
button. s "Using the Configuration Menu" p.55
1. Projector’s position (angle) s p.150
2. Image zoom s p.160
3. Lens shift/Zoom s p.159
4. Geometric Correction
Quick Corner s p.162
Point Correction s p.176
Remote Control
176


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Z8455WUNL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Z8455WUNL in the language / languages: English as an attachment in your email.

The manual is 6,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info