543669
131
Zoom out
Zoom in
Previous page
1/254
Next page
Using the Mail Notification Function to Report Problems
131
Using the Mail Notification Function to Report Problems
By setting the Mail Notification function from the projector's
Configuration Menu, notification messages will be sent to the preset
email addresses when a problem or warning occurs with a projector. This
will enable the operator to be notified of problems with projectors even at
locations away from the projectors. s Network Menu - Administrator
Settings - Mail Notification p.84
q
Up to three notification destinations (Addresses) can be recorded, and
notification messages can be sent to all three destinations at once.
If a projector develops a critical problem and suddenly stops working, it
may not be able to send a message notifying an operator of the problem.
Monitoring is possible if Standby Mode is set to Communication On from
the Extended menu of the projector's Configuration Menu, even if the
projector is in standby state (when the power is off). s p.67
Reading Problem Mail Notification Function
When the Mail Notification function is set to On and a
problem/warning occurs in the projector, the following e-mail is sent.
Sender: Email Address 1
Subject: EPSON Projector
Line 1: The name of the projector where the problem has occurred
Line 2: The IP address set for the projector where the problem has
occurred.
Line 3 and on: Details of the problem
The details of the problem are listed line by line. The following table
shows the details that are given in the message for each item. To deal with
problems/warnings, see "Reading the Indicators" s p.96
A (+) or (-) appears at the start of the message.
(+): A projector problem has occurred
(-): A projector problem has been dealt with
Message Cause (Problems/Warnings)
Clean Air Filter Air Filter Notice
Fan related error Fan Error
High-speed cooling in progress High Temp Warning
Internal error Internal Error
Internal temperature error High Temp Error
(Overheating)
Lamp cover is open. Lamp Cover Open
Lamp out Lamp Error
Lamp replacement notification Replace Lamp
Lamp timer failure Lamp Failure
Low Air Flow Low Air Flow
Low Air Flow Error Filter Airflow Error
No-signal No Signal
No Signal is input to the projector.
Check the connection status or check
that the power for the signal source is
turned on.
Power Err. (Ballast) Power Err. (Ballast)
Sensor error Sensor Error
131


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Z8455WUNL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Z8455WUNL in the language / languages: English as an attachment in your email.

The manual is 6,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info