543669
119
Zoom out
Zoom in
Previous page
1/254
Next page
Replacing Consumables
119
Replacing Consumables
Replacing the Lamps
Lamp replacement period
It is time to replace the lamp when:
The message "Replace the lamp." is displayed at the lower left of the
projection screen when you start projecting.
The lamp indicator flashes orange.
Replace the lamp indicated by the flashing indicator, either lamp 1 or 2.
The projected image gets darker or starts to deteriorate.
Caution
The lamp replacement message is set to appear after the following time periods in
order to maintain the initial brightness and quality of the projected images.
PowerLite Pro Z8250NL/Z8255NL/Z8350WNL/Z8450WUNL/Z8455WUNL
When Power Consumption is set continually at Normal 1: About 2400 hours
When Power Consumption is set continually at ECO: About 3400 hours
PowerLite Pro Z8150NL: About 2400 hours
Do not turn the projector on immediately after turning it off. Turning the projector
on and off frequently may shorten the life of the lamps.
If you continue to use the lamp after the replacement period has passed, the
possibility that the lamp may explode increases. When the lamp replacement
message appears, replace the lamp with a new one as soon as possible, even if it is
still working.
Depending on the characteristics of the lamp and the way it has been used, the lamp
may become darker or stop working before the lamp warning message appears. We
recommend that you keep a replacement lamp on hand at all times.
q
We recommend that you clean the air filter whenever you replace the lamp.
s p.116
Replace the air filter if it is discolored or if a message appears even after
cleaning the air filter. s p.122
How to replace the lamp
The lamps can be replaced even when the projector is suspended from a
ceiling.
Warning
When replacing a lamp because it has stopped illuminating, there is a possibility
that the lamp may be broken. If replacing the lamp of a projector that is installed on
the ceiling, you should always assume that the lamp is broken, and you should stand
to the side of the lamp cover, not underneath it. Remove the lamp cover gently.
119


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Z8455WUNL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Z8455WUNL in the language / languages: English as an attachment in your email.

The manual is 6,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info