Is the remote control light-emitting area pointing towards
the remote receiver on the projector when it is operated?
Point the remote control towards the remote receiver. sp.23
Is the remote control too far from the projector?The operating range for the remote control is about 49 ft (15 m). sp.23
Is direct sunlight or strong light from fluorescent lamps
shining onto the Remote Receiver?
Set the projector up in a location where strong light does not shine onto the remote receiver. Or set the
remote receiver to Off from Remote Receiver in the configuration menu. sSettings Menu - Remote
Receiverp.65
Is the correct setting for the remote receiver selected?Check the Remote Receiver from the configuration menu. sSettings Menu - Remote Receiverp.65
Are the batteries dead or have the batteries been inserted
correctly?
Make sure the batteries are inserted correctly or replace the batteries with new ones if necessary.
sp.22
Are the remote control ID and the projector ID matched?Make sure the ID for the projector you want to operate and the ID for the remote control match. To
operate all projectors by remote control regardless of the ID setting, set the ID switch on the side of the
remote control to Off. sp.173
Does Remote Control Type match the remote control that
you are using?
Check the Remote Control Type on the configuration menu. sExtended Menu - Operation -
Remote Control Typep.67
Is the optional remote control cable connected to the
remote control or to the projector's Remote port?
When the remote control cable is connected, the remote control light-emitting area or the projector's
remote receiver are disabled. When not using the remote control cable set, disconnect it from the
remote control and the Remote port.
Is the remote control button lock set?When the remote control button lock is set, buttons except for those needed for basic remote control
operations are deactivated. Hold down the [Help] button to cancel the remote control button lock.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Epson Z8455WUNL at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Epson Z8455WUNL in the language / languages: English as an attachment in your email.
The manual is 6,27 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
