543669
106
Zoom out
Zoom in
Previous page
1/254
Next page
Problem Solving
106
The image is truncated (large) or small, or the aspect is not suitable
Image colors are not right
Check Remedy
Is the aspect adjusted correctly? Press the [Aspect] button on the remote control to select an aspect suitable for the input source.
s p.27
Is a wide panel computer image being projected?
Only when projecting computer images
Change the setting according to the signal for the connected equipment. s Signal Menu - Resolution
p.62
Is the image still being enlarged by E-Zoom? Press the [Esc] button on the remote control to cancel E-Zoom. s p.41
Is Scale set to On?Set Scale to Off on the configuration menu. s Signal Menu - Scale p.62
Is Position adjusted correctly? Press the [Auto] button on the remote control or the [Enter] button on the control panel to
automatically adjust the position of projected images from a computer. If the images are not adjusted
correctly after using automatic adjustment, you can make the adjustments using Position from the
configuration menu.
Apart from computer analog RGB signals, you can adjust other signals while projecting by adjusting
Position from the configuration menu. s Signal Menu - Position p.62
Is the computer set for dual display?
Only when projecting computer images
If dual display is activated in the "Display Properties" of the computer's Control panel, only about half of
the image on the computer screen is projected. To display the entire image on the computer screen,
turn off the dual display setting. s Computer video driver documentation
Is the correct resolution selected?
Only when projecting computer images
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays" p.198 s Computer documentation
Check Remedy
Do the input signal settings match the signals from the
connected device?
Change the setting according to the signal for the connected equipment. s Signal Menu - Input
Signal, Video Signal p.62
Is the image Brightness set correctly? Adjust the Brightness setting from the configuration menu. s Image Menu - Brightness p.60
Are the cables connected correctly? Check that all the cables required for projection are securely connected. s p.152, p.154
Is Contrast
g adjusted correctly? Adjust the Contrast setting from the configuration menu. s Image Menu - Contrast p.60
Is the Color Adjustment correctly? Adjust the Advanced setting from the configuration menu. s Image Menu - Advanced p.60
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson Z8455WUNL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson Z8455WUNL in the language / languages: English as an attachment in your email.

The manual is 6,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info