Scanning From a Computer
Install the soware and check that the network scan service is enabled to scan via a network from the computer.
Related Information
& “Soware to be installed” on page 43
& “Conrming that Network Scan is Enabled” on page 43
Software to be installed
❏ EPSON Scan 2
is is a scanner driver. If you use the device from a computer, install the driver on each client computer.
If EpsonNet SetupManager is used, the printer driver is also distributed as a package.
Related Information
& “EpsonNet SetupManager” on page 116
Conrming that Network Scan is Enabled
You can set the network scan service when you scan from a client computer over the network.
e
default setting is
enabled.
1. Access Web Cong and select the Scan/Copy tab > Network Scan.
2. Make sure that Enable scanning of EPSON Scan is selected.
If it is selected, this task is completed. Close Web Cong.
If it is cleared, select it and go to next step.
3. Click Next.
4. Click OK.
e network is re-connected, and then the settings are enabled.
Related Information
& “Accessing Web Cong” on page 36
Scanning using the control panel
e scan to folder function and the scan to mail function using the printer’s control panel, as well as the transfer of
scan results to mail, folders, etc. are performed by executing a job from the computer.
Related Information
& “Settings of Servers and Folders” on page 44
Administrator's Guide
Function Settings
43