❏ 112bit: AES256/AES128/3DES
❏ 128bit: AES256/AES128
❏ 192bit: AES256
❏ 256bit: AES256
The message "Out of date" appears when accessing Web
Cong
using SSL communication (https).
If the certicate is out of date, obtain the certicate again. If the message appears before its expiration date, make
sure that the printer's date is congured correctly.
The message "The name of the security certicate does not match···" appears when accessing Web
Cong using SSL communication (https).
e printer's IP address entered for Common Name for creating a self-signed certicate or CSR does not match
with the address entered into the browser. Obtain and import a certicate again or change the printer name.
The printer is being accessed via a proxy server.
If you are using a proxy server with your printer, you need to congure your browser's proxy settings.
❏ Wi n d o w s :
Select Control Panel > Network and Internet > Internet Options > Connections > LAN settings > Proxy
server, and then congure not to use the proxy server for local addresses.
❏ Mac OS:
Select System Preferences > Network > Advanced > Proxies, and then register the local address for Bypass
proxy settings for these Hosts & Domains.
Example:
192.168.1.*: Local address 192.168.1.XXX, subnet mask 255.255.255.0
192.168.*.*: Local address 192.168.XXX.XXX, subnet mask 255.255.0.0
Related Information
& “Accessing Web Cong” on page 36
& “Assigning the IP Address” on page 18
& “Assigning an IP Address Using EpsonNet Cong” on page 116
Model name and/or IP address are not displayed on EpsonNet
Cong
Did you select Block, Cancel, or Shut down when a Windows security screen or a rewall screen was
displayed?
If you select Block, Cancel, or Shut down, the IP address and model name will not display on EpsonNet Cong or
EpsonNet Setup.
To correct this, register EpsonNet
Cong
as an exception using Windows
rewall
and commercial security
soware.
If you use an antivirus or security program, close it and then try to use EpsonNet
Cong
.
Administrator's Guide
Solving Problems
109
