& “Changing from Wi-Fi Connection to Ethernet Connection” on page 128
Changing from Ethernet Connection to Wi-Fi Connection
Changing to Wi-Fi Connection from the Control Panel
Change the Ethernet connection to Wi-Fi connection from the printer's control panel. e changing connection
method is basically the same as the Wi-Fi connection settings. See the topic in this guide on Wi-Fi connection
settings from the printer's control panel.
Related Information
& “Connecting to the Wireless LAN (Wi-Fi)” on page 26
Changing to Wi-Fi Connection by Using Web Cong
Change the Ethernet connection to Wi-Fi connection by using Web Cong.
1. Access Web Cong and select the Network tab > Wi- Fi .
When the administrator password has been set, log in as an administrator by entering the user name and
password.
2. Click Setup.
3. Select the SSID for the access point and enter the password.
If the SSID you want to connect to is not displayed, select Enter SSID and enter the SSID.
4. Click Next.
5. Conrm the displayed message and click OK.
6. Disconnect the Ethernet cable from the printer.
Note:
You can also change the connection method by using Epson Device Admin. For details, see the manual or help for Epson
Device Admin.
Related Information
& “Accessing Web
Cong
” on page 28
& “Epson Device Admin” on page 121
Changing from Wi-Fi Connection to Ethernet Connection
Changing the Network Connection to Ethernet from the Control Panel
Follow the steps below to change the network connection to Ethernet from Wi-Fi using the control panel.
Administrator's Guide
Appendix
128
